4) Remove the mounting screw t ofthe control panel.5) Open the front door; then, removethe three mounting screws y andthe connector cover u, and discon-nect the connector, and open thehopper i.Check to make sure that the con-nector is connected beforeinstalling the hopper assembly.6) Shift the fixing/feeding assemblyreleasing lever o from horizontal tovertical position, and slide out thefixing/feeding assembly !0.CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-22 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Caution:Figure 7-419ui yFigure 7-418tFigure 7-420!0o
