7. Adjusting the Separation Roller Pressure of the Holding TrayTurn the separation adjusting roll so that the shaft distance to the separation belt is32.7 ±0.1 mm.Figure 11-2318. Pick-Up/Feeding Roller of the MultifeederIf double feeding or pick-up failure occurs during pick-up, adjust the position of thepressure spring of the separation roller.• If double feeding occurs, move the spring in the direction of arrow A.• If pick-up failure occurs, move the spring in the direction of B.Figure 11-232BA32.7±0.1mmCHAPTER 11 TROUBLESHOOTING11-28 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
