4. Orientation of the Multifeeder Pick-Up Roller4-1Orientation of the Paper Deck-A1 Pick-Up RollerInstall the pick-up roller by reversing the steps used to remove it with the following inmind:• The pick-up roller at the front and the rear are not interchangeable.• The collar of the pick-up roller at the front is silver.When installing the pick-up roller q to the pick-up assembly, be sure that the roundmarking w on the collar (silver) faces the front.q Pick-up rollerw Marking (collar)Figure 11-228• The collar of the pick-up roller at the rear is gold.When installing the pick-up roller r to the pick-up assembly, make sure that theround marking t on the side of the roller and the round marking y on the collar(gold) face the rear.r Pick-up rollert Marking (roller)y Marking (collar)Figure 11-228aryDirection ofrotationCollar (gold) Rear (copier)tqwDirection ofrotationCollar (silver) Front (copier)CHAPTER 11 TROUBLESHOOTING11-25COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
