5. Cleaning the Cleaner SideScraperClean the cleaner side scraperwhen replacing the cleaning blade(every 500,000 copies).1) Remove the cleaning blade.2) Remove any paper lint collecting atthe tip of the side scraper (gap Abetween magnet roller and tonerguide roller) with tweezers.3) Remove the toner collecting on thesurface of the magnetic roller.(Scoop up with copy paper shapedin the form of the letter U.)4) Turn the magnet roller clockwise(viewing from the front).5) When the area from which tonerwas removed in step 3) is everlycoated, repeat steps 3) through 5).CHAPTER 4 IMAGE FORMATION SYSTEM4-65COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 4-355aToner guide roller4~8mmSide scraper (rear)Magnet rollerWaste toner to be removed(rear)30~40mmAFigure 4-355bToner guide roller4~8mmSide scraper (front)Magnet rollerWaste toner to be remove .(front)30~40mmA
