Chapter 22-18The card reader must be used in combination with the Card Reader Mounting Kit-B1.2.6.2 Checking the Contents 0007-2707iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / iR3530 /T-2-6F-2-78T-2-7F-2-792.6.3 Installation Procedure 0007-2709iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / iR3530 /When you have installed the Card Reader-C1, make the following selections, COPIER> FUNCTION> INSTALL> CARD, and enter the card number you will beusing; otherwise, the card will not be recognized upon insertion.Be sure to go through the following steps on the host machine before starting the work:1. Hold down the control panel power switch for 3 sec or more.2. Go through the shutdown sequence as instructed on the screen so that you may turn off the main power switch.3. Turn off the main power switch.4. Disconnect the power cable (from the wall outlet).[1] Card Reader-C1 1 pc.[2] RS tightening screw (M4x10) 1 pc.[3] Toothed washer 1 pc.[1] Card reader base 1 pc.[2] Relay harness 1 pc.[3] TP screw (M4x25) 1 pc.[4] TP screw (M4x8) 1 pc.[5] Toothed washer 2 pc.C[1] [2] [3]
