Chapter 1010-20/ iR4570N1) Remove the 4 screws [1], and detach the control panel base cover [2].F-10-4810.5.4.3 Removing the Control Panel Inside Frame 0007-7573iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N1) Disconnect the 2 connectors between the control panel PCB and thecontrol panel key switch PCB; then, free the harness from the 2 clamps[2].2) Disconnect the 2 connectors [3] between the control panel PCB and thecontrol panel LCD.Be sure to move the stopper in the direction of the arrow to detach. These 2stoppers are moved in different directions.3) Disconnect the 2 connectors [3] between the control panel inverter PCB.F-10-494) Remove the control panel inside frame [1]. (2 TP screws [2], and 11 self-tapping screws [3])F-10-5010.5.4.4 Removing the Control Panel LCD 0007-7575iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N1) Remove the screw [1], and detach the control panel LCD [2].F-10-5110.5.4.5 Removing the Control Panel 0009-2846iR2230 / / / iR3530 /1) Open the right door [1].F-10-522) Remove the 2 screws [1].F-10-533) Remove the rubber cap [1], and remove the screw [2].4) Slide the control panel in the direction of the arrow.F-10-545) Disconnect the connector [1], and detach the control panel.
