Chapter 88-611) Match the hinge [1] found at the bottom of the right door against the lug.2) Engage the hinge [2] found on the top of the right door with the hookfound on the side plate.F-8-185When tightening the 2 screws used to fix the hinge in place, be sure to closethe right door first.8.8.9.3 Removing the Right Door 0007-7339iR2270 / iR2870 / / iR2270N / / iR2230 / / / iR3530 /1) Open the right door.F-8-1862) Remove the reuse band [1], and disconnect the connector [2].3) Remove the 2 screws (M4x8; RS tightening), and detach the right door.F-8-187Attaching the Right Door1) Match the hinge [1] found at the bottom of the right door against the lug.2) Engage the hinge [2] found on the top of the right door with the hookfound on the side plate.F-8-188When tightening the 2 screws used to fix the hinge in place, be sure to closethe right door first.8.8.9.4 Removing the Right Cover (lower front) 0007-6620iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Open the pedestal right door [1]. (if equipped with a Cassette FeedingUnit-Y2)2) Open the lower right door [2].3) Remove the 2 screws [3], and detach the right cover (lower front) [4].F-8-1898.8.9.5 Removing the Pickup Assembly 1 0007-6623iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Slide out the cassette 1/2.2) Disconnect the 3 connectors [1]; then, free the harness from the 2 wiresaddles [2] and the 2 clamps [3].[1][2][3][4]
