Chapter 1010-35F-10-15910.5.12.5 Removing the Developing Assembly 0007-8402iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the screw [1].F-10-1602) Shift the locking lever [1] to the left to release the developing assembly.F-10-1613) Slide the developing assembly [1] slightly to the front; then, disconnectthe connector [2].F-10-1624) Remove the developing assembly [1].F-10-163Be sure to hold the developing assembly as shown.F-10-164When fitting the developing assembly, be sure to fit the lower right segment[2] of the developing assembly [1] in the rail [3] of the machine. Thereafter,slide the developing assembly so that [A] of the developing assembly match-es [B] of the rail.
