Chapter 88-951) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-Y2)2) Open the right lower door [2].3) Remove the 5 screws [3], and detach the right cover (rear) [4].F-8-4018.8.25.2 Removing the Front Cover Unit 0007-6763iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Open the front cover [1].F-8-4022) Remove the face cover rubber [1].3) Remove the binding screw [2].4) Remove the RS tightening screw [3].5) Detach the front cover unit [4] by moving it in the direction of the arrow.F-8-4038.8.25.3 Removing the Delivery Tray 0007-6765iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Loosen the screw [1].2) Remove the screw [2].3) Detach the delivery tray [3].F-8-4048.8.25.4 Removing the Right Door 0007-6766iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /1) Open the right door.F-8-4052) Remove the screw [1], and detach the fixing plate [2].F-8-4063) Remove the joint shaft [1], and free the extension delivery unit [2] fromthe right door.F-8-4074) Disconnect the connector [1], and remove the reuse band [2]; then, removethe 2 screws (M4x8; RS tightening).[1][2][3][3][3][4]
