Chapter 88-63F-8-1968.8.10 Cassette Paper Level Sensor (A/B)8.8.10.1 Removing the Right Cover (rear) 0007-6627iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR35301) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-Y2)2) Open the right lower door [2].3) Remove the 5 screws [3], and detach the right cover (rear) [4].F-8-1978.8.10.2 Removing the Right Door 0007-6656iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR35301) Open the right door.F-8-1982) Remove the screw [1], and detach the fixing plate [2].F-8-1993) Remove the joint shaft [1], and free the extension delivery unit [2] fromthe right door.F-8-2004) Disconnect the connector [1], and remove the reuse band [2]; then, removethe 2 screws (M4x8; RS tightening).F-8-2015) While freeing the hinge assembly [2], detach the right door.F-8-202Attaching the Right Door1) Match the hinge [1] found at the bottom of the right door against the lug.2) Engage the hinge [2] found on the top of the right door with the hookfound on the side plate.[1][2][3][3][3][4]
