Chapter 88-87F-8-3518.8.19.4 Removing the Registration Clutch 0007-6723iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Disconnect the connector (2P) [1], and free the cable from the edge saddle[2] and the 3 wire saddles [3].2) Remove the E-ring [4], and detach the registration clutch [5].F-8-3528.8.20 Feeding Roller8.8.20.1 Removing the Pickup Roller/Feed Roller/Separation Roller 0008-3154iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Slide out the cassette.2) Open the right door (in the case of the separation roller).3) Pick the tabs of the individual rollers, and detach the pickup roller [1], feedroller [2], and separation roller [3].F-8-353Point to Note When Replacing the Feed/Separation Roller 1The collar (roller core) of the machine's feed/separation roller is black.8.8.21 Vertical Path Roller8.8.21.1 Removing the Right Cover (rear) 0007-6736iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-Y2)2) Open the right lower door [2].3) Remove the 5 screws [3], and detach the right cover (rear) [4].F-8-3548.8.21.2 Removing the Right Door 0007-6737iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /1) Open the right door.F-8-3552) Remove the screw [1], and detach the fixing plate [2].[1][2][3][3][3][4]
