Chapter 22-33F-2-1205) Attach the connector cover [1].6) Attach the plastic film [2] (for protecting the AC cable) over the cable [3] to fit the end of the connector cover [A] and the end of the rear side of the host machine[B].F-2-1217) Put back the cassette 3 and 4.2.9.5 Mounting the Heater PCB 0015-2865iR3025 / / iR3025N / iR3030 / / iR3030N / iR3035 / / iR3035N / iR3045 / / iR3045N1) Disconnect the lattice connector [1] of the cassette pedestal.F-2-1222) Detach the small cover [2] of the lower rear cover [1] (the detached small cover is not used).- 1 screw [3]3) Detach the rear cover [1].- 14 screws [4]
