Chapter 11-4The following shows the functions that the system will provide and the accessories that will be needed:T-1-10T-1-11T-1-121.1.6 Output Accessories System Configuration 2 0008-6922iR2230 / / / iR3530The configuration is as shown in the following figure:F-1-4T-1-131.1.7 Delivery Accessory System Configuration 3 0006-6234iR2270 / iR2870 / iR3570 / iR4570 / / / /The following shows a typical system configuration of this type:[4]Accessories Power Supply-P2 (needed wheninstalling [1]; standard with 120/230V model)[4a]Installation Procedure- Installation of the Accessories Power Supply-P2[5]Inner Puncher Kit-Q1/R1/S1/T1 [5a]Installation Procedure- Installation of the Inner Puncher Kit-Q1/R1/S1/T1[6]Finisher Additional Tray-B1 [6a]Installation Procedure- Installation of the Finisher Additional Tray-B1Function provided Accessory needed- 2-way delivery- staplingFinisher-S1Accessories Power Supply-P23 Way Unit-A1Copy Tray-J1Function provided Accessory needed- 3-way delivery- staplingFinisher-S1Accessories Power Supply-P23 Way Unit-A1Finisher Additional Tray-B1Copy Tray-J1Function provided Accessory needed- punching Finisher-S1Accessories Power Supply-P23 Way Unit-A1Inner Puncher Kit-Q1/R1/S1/T1[1]Inner 2-Way Tray-D1 [1a]Installation Procedure- installation of the Inner 2-Way Tray-D1[2]3Way Unit-A1(powered by host; no need for AccessoriesPower Supply-P2)[2a]Installation Procedure- installation of the 3Way Unit-A1[3]Output Tray-J1 [3a]Installation Procedure- installation of the Output Tray-J1[3a][3][1a][2a][2][1]
