Chapter 1010-31F-10-13210.5.10 Controller Power Supply PCB10.5.10.1 Removing the Rear Cover 0007-6380iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the 13 screws [1] and then the other screw [2]; then, detach therear cover [3].If the left cover (lower) has already been detached, the screw [3] should alsohave been removed.F-10-13310.5.10.2 Removing the Left Cover (lower) 0007-6381iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Take out the cassettes 1 and 2 [1].2) Remove the 4 screws [2] and the other screw [3]; then, detach the leftcover (lower) [4].If the rear cover has already been detached, the screw [3] should also havebeen removed.F-10-13410.5.10.3 Removing the Left Cover (Rear) 0007-6382iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the 2 screws [1]; then, detach the left cover (rear) [2].F-10-13510.5.10.4 Removing the Accessories Power Supply PCB0007-6383iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Disconnect the connector J640 [1].F-10-1362) Remove the 6 connectors [1], and free the harness from the cable clamp[2].F-10-137[1] [1][1][1][1][1][1][2][1][1][1][1][1][1][3][2][2][1][4][3]
