Chapter 88-100F-8-436When mounting the harness cover [1], be sure to keep the harness [2] withinthe space [3] indicated in the figure so that the harness [2] will not come intocontact with the gear [4].F-8-437Do not touch the screw [1]. Turning it will change the pressure of the fixingassembly, which cannot be adjusted in the field, necessitating the replace-ment of the fixing assembly.F-8-4388.8.26.8 Removing the Fixing/Delivery Drive Assembly 0007-6792iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the screw [1], and detach the harness cover [2].F-8-4392) Disconnect the connector [1] of the harness, and free the harness from thecable clamp [2].F-8-4403) Remove the 4 screws [1], and detach the fixing/delivery drive assembly 1[2].F-8-4418.8.27 Separation Roller8.8.27.1 Removing the Pickup Roller/Feed Roller/Separation Roller 0008-3155iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Slide out the cassette.2) Open the right door (in the case of the separation roller).3) Pick the tabs of the individual rollers, and detach the pickup roller [1], feedroller [2], and separation roller [3].F-8-442
