Chapter 1717-5F-17-67) When the result of registration is indicated, click [OK].F-17-717.2.2 Making Connections 0008-7373iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N / / iR4570NYou are now ready to connect the PC to the machine.[Preparatory Work]Items to Prepare- PC to which the SST (version 3.01 or later) and the system software for the iR4570/3570, 2870/2270 has been registered- Twisted pair cross cable10Base-T: Category 3 or 5100Base-TX: Category 5[Procedure]1) Start up the PC.2) Check the network settings of the PC.- At the command prompt, type 'IPCONFIG', and press the Return key.- Check to see that the network settings are as follows:IP address: 172.16.1.160subnet mask: 255.255.255.0default gateway: anyDo not use the following IP address:- 172.16.1.0- 172.16.1.100- 172.16.1.255If the settings are not as indicated below, make the appropriate changes:
