Chapter 88-89F-8-363When tightening the 2 screws used to fix the hinge in place, be sure to closethe right door first.8.8.21.4 Removing the Right Cover (lower front) 0007-6739iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Open the pedestal right door [1]. (if equipped with a Cassette FeedingUnit-Y2)2) Open the lower right door [2].3) Remove the 2 screws [3], and detach the right cover (lower front) [4].F-8-3648.8.21.5 Removing the Pickup Assembly 1 0007-6740iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Slide out the cassette 1/2.2) Disconnect the 3 connectors [1]; then, free the harness from the 2 wiresaddles [2] and the 2 clamps [3].F-8-3653) Remove the 4 screws [1], and take out the pickup unit 1 [2].F-8-3668.8.21.6 Removing the Pickup Assembly 2 0007-6741iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Slide out the cassette 1/2.2) Disconnect the connector [1], and free the harness from the guide; then,remove the 4 screws [2], and detach the pickup assembly 2 [3].F-8-3678.8.21.7 Removing the Sensor Mounting Plate 0007-6742iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the 2 TP screws [1] and the binding screw [2] from the rear of thepickup assembly, and detach the bracket [3].[1][2][3][4]
