Chapter 1616-30T-16-4916.5.2 FEEDER16.5.2.1 Feeder List 0007-9924iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 /FEEDER >FUNCTIONT-16-50TRS-DATA Transferring memory received data to the box21) Select this item.2) Press the OK key to start data transfer.COPIER > FUNCTION > SYSTEMSub-item Description LevelDOWNLOAD Switching to Download mode11) Select this item.2) Press the OK button to enter Download mode.CHK-TYPE Specifying a partition number for executing HD-CHK11) Select this item.2) Select a partition number with the ten-key pad.0: Entire HDD1: Image accumulation area2: General-purpose file (user-defined data/various log data/PDL spool data/imagedata management information) storage area3: PDL-related file storage area4: Firmware/address book/file storage area5: MEAP area6: Address book areaRemarks: HD-CLEAR shall be indispensable for 4 and 6.HD-CHECK Checking and restoring the partition specified by CHK-TYPE11) Select this item.2) Press the OK key.3) The result (1:OK, 2:NG (hardware), 3:NG (software) restored/alternative sector)is displayed.HD-CLEAR Initializing the partition specified by CHK-TYPE11) Select this item.2) Press the OK key.FEEDER >FUNCTIONSub-item Description LevelMTR-CHK Checking the ADF motor and other individually11) Press MTR-CHK to reverse its display.2) Enter a part corresponding number from the ten-key pad.3) Press the OK key.4) Press MTR-ON to check the motor operation.0 to 1TRY-A4 Automatically adjusting document width detection by DF (A4width) 1TRY-A5R Automatically adjusting document width detection by DF (A5Rwidth) 1TRY-LTR Automatically adjusting document width detection by DF (LTRwidth) 1TRY-LTRR Automatically adjusting document width detection by DF (LTRRwidth) 1FEED-CHK Checking ADF paper feed operation11) Press FEED-CHK to reverse its display.2) Enter a part corresponding number from the ten-key pad.3) Press the OK key.4) Press FEED-ON to check ADF paper feed operation.Paper feed mode0: Simplex feed1: Duplex feed2: Simplex feed with stamping3: Duplex feed with stamping[Value at shipping: Factory adjustment value / Value after RAMclearance: 0]COPIER > FUNCTION > MISC-PSub-item Description Level
