Chapter 88-94F-8-395When tightening the 2 screws used to fix the hinge in place, be sure to closethe right door first.8.8.23.4 Removing the Duplex Feed Sensor 0007-6976iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the 2 screws (w/ collar) [1], and detach the transfer frame [2].F-8-3962) Disconnect the connector [1], and remove the duplex feed sensor [2].F-8-3978.8.24 Duplex Feed Clutch8.8.24.1 Removing the Rear Cover 0007-7324iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / /1) Remove the 13 screws [1] and then the other screw [2]; then, detach therear cover [3].If the left cover (lower) has already been detached, the screw [3] should alsohave been removed.F-8-3988.8.24.2 Removing the Duplex Feed Clutch 0007-7325iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / /1) Disconnect the connector [1], and remove the 2 screws [2]; then, detachthe clutch fixing plate [3].F-8-3992) Remove the duplex feed clutch [1].F-8-4008.8.25 Delivery Assembly 18.8.25.1 Removing the Right Cover (rear) 0008-1512iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /[1] [1][1][1][1][1][1][2][1][1][1][1][1][1][3]
