Chapter 88-56F-8-1528.8.7.5 Removing the Pickup Assembly 2 0007-6608iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Slide out the cassette 1/2.2) Disconnect the connector [1], and free the harness from the guide; then,remove the 4 screws [2], and detach the pickup assembly 2 [3].F-8-1538.8.7.6 Removing the Pickup Assembly 1 0007-6609iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Slide out the cassette 1/2.2) Disconnect the 3 connectors [1]; then, free the harness from the 2 wiresaddles [2] and the 2 clamps [3].F-8-1543) Remove the 4 screws [1], and take out the pickup unit 1 [2].F-8-1558.8.7.7 Removing the Cassette Size Sensor 0007-6610iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the snap stop, and detach the PCB cover [1].F-8-1562) Disconnect the connector from the cassette size sensor relay PCB (in thecase of the size sensor 1, disconnect the connector [1]; in the case of thesize sensor 2, disconnect the connector [2]).3) Free the harness from the clamp (in the case of the size sensor 1, the 2clamps [3]; in the case of the size sensor 2, the 4 clamps [3] and [4]).F-8-1574) Remove the screw [1], and detach the cassette size sensor together withthe PCB [2] (in the case of the size sensor 1, together with the size sensor2; in the case of the size sensor 2, remove the sensor on its own).[1][2][3][4]
