Chapter 22-47F-2-1642.12.2 Turning Off the Host Machine 0011-0573iR2270 / iR2870 / iR3570 / iR4570 / / / / iR3570N / / iR2230 / / / iR3530 / / / / / / /Turning Off the Main PowerWhen turning off the main power, be sure to go through the following in strict sequence to protect the machine's hard disk:[1] Hold down on the power switch on the control panel for 3 sec or more.[2] Operate on the touch panel according to the shut-down sequence indicated so that the main power switch may be turned off.[3] Turn off the main power switch.[4] Disconnect the power cable (for the power outlet).[1] Speaker unit (upper) 1 pc.[2] Speaker unit (lower) 1 pc.[3] Cable (1300mm) 1 pc.[4]* Cable (1850mm) 1 pc.[5] Cord guide (5 cord guide to be used) 7 pc.[6] Voice Guidance Board 1 pc.[7] Voice Guidance Board Face Plate 1 pc.[8]* Voice Guidance Board Face Plate 1 pc.[9] Binding screw (M3X6) 2 pc.[10] Binding screw (M4X6) 1 pc.[11]* Binding screw (M4X40) 2 pc.[12] Binding screw (M3X16) 1 pc.[13] Binding screw (M4X16) 1 pc.[14] Ferrite core 1 pc.[15]* Clamp 1 pc.[16] Users Guide 1 pc.[17] User Manual CD-ROM 1 pc.*Not to be used for this machine[1] [2] [3] [4] [5] [6][8] [9] [10] [14] [15][11] [12] [13][7][16] [17]
