Chapter 88-832) Free the clutch cable [2] from the wire saddle [3].3) Remove the fixing plate [4]. (2 screws [5])F-8-3274) Pull out the manual feed pickup clutch [1].F-8-3288.8.18 Manual Separation Pad8.8.18.1 Removing the Right Cover (rear) 0007-6714iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-Y2)2) Open the right lower door [2].3) Remove the 5 screws [3], and detach the right cover (rear) [4].F-8-3298.8.18.2 Removing the Right Door 0007-6715iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /1) Open the right door.F-8-3302) Remove the screw [1], and detach the fixing plate [2].F-8-3313) Remove the joint shaft [1], and free the extension delivery unit [2] fromthe right door.F-8-3324) Disconnect the connector [1], and remove the reuse band [2]; then, removethe 2 screws (M4x8; RS tightening).F-8-3335) While freeing the hinge assembly [2], detach the right door.F-8-334Attaching the Right Door[1][2][3][3][3][4]
