Chapter 77-27F-7-1262) Remove the screw [1], and detach the toner feedscrew motor assembly [2].F-7-1273) Remove the screw [1], and detach the toner feedscrew motor [3] from thebase.F-7-1287.12.4.13 Removing the Sub Hopper 0007-8396iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the 2 screws [2] from the back of the sub hopper [1].F-7-1292) Check the phase of the gear [1] shown in the figure.F-7-1303) Remove the 3 screws [1].F-7-1314) Free the cable from the edge saddle [1].F-7-1325) Remove the screw [1], and release the arm [2].F-7-1336) Remove the bushing unit [2] from the sub hopper [1].
