Chapter 1010-471) Match the hinge [1] found at the bottom of the right door against the lug.2) Engage the hinge [2] found on the top of the right door with the hookfound on the side plate.F-10-242When tightening the 2 screws used to fix the hinge in place, be sure to closethe right door first.10.5.16.3 Removing the Right Door 0007-7050iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / / iR3530 /1) Open the right door.F-10-2432) Remove the reuse band [1], and disconnect the connector [2].3) Remove the 2 screws (M4x8; RS tightening), and detach the right door.F-10-244Attaching the Right Door1) Match the hinge [1] found at the bottom of the right door against the lug.2) Engage the hinge [2] found on the top of the right door with the hookfound on the side plate.F-10-245When tightening the 2 screws used to fix the hinge in place, be sure to closethe right door first.10.5.17 Circuit Braker10.5.17.1 Removing the Rear Cover 0007-6388iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the 13 screws [1] and then the other screw [2]; then, detach therear cover [3].If the left cover (lower) has already been detached, the screw [3] should alsohave been removed.F-10-24610.5.17.2 Removing the Circuit Breaker 0007-6389iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the 2 screws [1].[1] [1][1][1][1][1][1][2][1][1][1][1][1][1][3]
