Chapter 99-24F-9-1284) Free the AC harness [1] from the edge saddle [2].F-9-1295) Free the relay connector [1] of the signal cable from the connector holder[2].F-9-1306) Disconnect the connector [2] from the relay connector [1].F-9-1317) Remove the fixing film unit [1].F-9-1329.5.5.8 Removing the Inside Delivery Sensor 0007-7932iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Disconnect the connector [2] of the harness [1].F-9-1332) Remove the front latch [2] of the inside delivery sensor [1]; then, detachthe inside delivery sensor.F-9-1349.5.6 Fixing Film Sensor9.5.6.1 Removing the inside delivery cover unit (old) 0007-7895iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /The difference between new and old inside delivery cover unit:Old inside delivery cover unit does not have a grip ring [1] at hinge. In thiscase, detach the cover following the procedure below.F-9-1351) Remove the screw [1] and the stepped screw [2], and detach the insidedelivery cover unit [3].[1]
