Chapter 88-60F-8-1778.8.8.8 Removing the Cassette Retry Paper Sensor 0007-6617iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Disconnect the connector [1], and detach the cassette retry paper sensor[2].F-8-1788.8.9 Cassette Paper Sensor8.8.9.1 Removing the Right Cover (rear) 0007-6618iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-Y2)2) Open the right lower door [2].3) Remove the 5 screws [3], and detach the right cover (rear) [4].F-8-1798.8.9.2 Removing the Right Door 0007-6658iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /1) Open the right door.F-8-1802) Remove the screw [1], and detach the fixing plate [2].F-8-1813) Remove the joint shaft [1], and free the extension delivery unit [2] fromthe right door.F-8-1824) Disconnect the connector [1], and remove the reuse band [2]; then, removethe 2 screws (M4x8; RS tightening).F-8-1835) While freeing the hinge assembly [2], detach the right door.F-8-184Attaching the Right Door[1][2][3][3][3][4]
