Chapter 88-82F-8-3212) Remove the reuse band [1], and disconnect the connector [2].3) Remove the 2 screws (M4x8; RS tightening), and detach the right door.F-8-322Attaching the Right Door1) Match the hinge [1] found at the bottom of the right door against the lug.2) Engage the hinge [2] found on the top of the right door with the hookfound on the side plate.F-8-323When tightening the 2 screws used to fix the hinge in place, be sure to closethe right door first.8.8.17.4 Removing the Rear Cover 0007-6677iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the 13 screws [1] and then the other screw [2]; then, detach therear cover [3].If the left cover (lower) has already been detached, the screw [3] should alsohave been removed.F-8-3248.8.17.5 Removing the Main Power Switch 0007-6679iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the 4 fastons [1], and detach the main power switch [2]. (snap-ontype)F-8-325When connecting the 4 fastons, be sure that they are located as indicated bytheir specific location numbers.F-8-3268.8.17.6 Removing the Manual Feed Pickup Clutch 0007-6681iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Disconnect the connector (2P) [1].[1] [1][1][1][1][1][1][2][1][1][1][1][1][1][3]
