Chapter 88-48F-8-1023) Remove the 4 screws [1], and take out the pickup unit 1 [2].F-8-1038.8.2 Pick-up Unit 28.8.2.1 Removing the Right Cover (rear) 0007-6555iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-Y2)2) Open the right lower door [2].3) Remove the 5 screws [3], and detach the right cover (rear) [4].F-8-1048.8.2.2 Removing the Right Cover (lower front) 0007-6556iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Open the pedestal right door [1]. (if equipped with a Cassette FeedingUnit-Y2)2) Open the lower right door [2].3) Remove the 2 screws [3], and detach the right cover (lower front) [4].F-8-1058.8.2.3 Removing the Pickup Assembly 2 0007-6557iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Slide out the cassette 1/2.2) Disconnect the connector [1], and free the harness from the guide; then,remove the 4 screws [2], and detach the pickup assembly 2 [3].F-8-1068.8.3 Pickup Roller8.8.3.1 Removing the Pickup Roller/Feed Roller/Separation Roller 0007-6569iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Slide out the cassette.2) Open the right door (in the case of the separation roller).3) Pick the tabs of the individual rollers, and detach the pickup roller [1], feedroller [2], and separation roller [3].F-8-107Point to Note When Replacing the Feed/Separation Roller 1The collar (roller core) of the machine's feed/separation roller is black.[1][2][3][3][3][4][1][2][3][4]
