Chapter 22-27F-2-10520) Attach the switch settings label [1] on the top cover of the controller, and record the settings of the switches.21) Secure the top cover [2] of the controller in place using 2 screws [3]. When doing so, check to be sure that the cable of the power supply unit is held in placeby the cable guide inside the controller and is not trapped by the top cover [2].F-2-1062.8 Installing the Reader Heater2.8.1 Checking the Parts 0015-2924iR3025 / / iR3025N / iR3030 / / iR3030N / iR3035 / / iR3035N / iR3045 / / iR3045NPrepare the following parts because each part of the reader heater is assigned as service part.F-2-107T-2-112.8.2 Turning Off the Host Machine 0013-4841iR2270 / iR2870 / iR3570 / iR4570 / / / / / / iR3025 / / iR3025N / iR3030 / / iR3030N / iR3035 / / iR3035N / iR3045 / / iR3045NNo. Name Part No. Qty.[1] Reader Heater FK2-0228-000 2 pc.[2] Clamp WT2-0507-000 3 pc.[3] Screw (Binding M4X6) XB3-6400-805 2 pc.LED1 LED2 LED321LED5LED6LED4 IC6SW1SW4SW361BAT1CN412CN3 CN2SW2[25][3][2][3][1][1][3][2]
