Chapter 88-67F-8-221When tightening the 2 screws used to fix the hinge in place, be sure to closethe right door first.8.8.11.3 Removing the Right Door 0007-7343iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / / iR3530 /1) Open the right door.F-8-2222) Remove the reuse band [1], and disconnect the connector [2].3) Remove the 2 screws (M4x8; RS tightening), and detach the right door.F-8-223Attaching the Right Door1) Match the hinge [1] found at the bottom of the right door against the lug.2) Engage the hinge [2] found on the top of the right door with the hookfound on the side plate.F-8-224When tightening the 2 screws used to fix the hinge in place, be sure to closethe right door first.8.8.11.4 Removing the Manual Feed Unit 0007-6644iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the manual upper guide link [1] (plastic E-ring [2] and boss [3]).F-8-2252) Remove the screw [2], and detach the manual feed guide [1].F-8-2263) Remove the connector cover [1] (snap-on).[1] [2][3][1][2]
