Chapter 88-542) Remove the 5 screws [1]. Remove the power cord base [2].F-8-1383) Disconnect the 2 connectors [1].F-8-1394) Remove the 5 screws [1], and detach the pickup motor base [2].F-8-1408.8.6.4 Removing the Cassette Pickup Motor 2 0007-6601iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the 2 screws [1], and detach the cassette pickup motor 2 [2].F-8-1418.8.7 Cassette Size Sensor8.8.7.1 Removing the Right Cover (rear) 0007-6602iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-Y2)2) Open the right lower door [2].3) Remove the 5 screws [3], and detach the right cover (rear) [4].F-8-1428.8.7.2 Removing the Right Door 0007-6603iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /1) Open the right door.F-8-1432) Remove the screw [1], and detach the fixing plate [2].F-8-1443) Remove the joint shaft [1], and free the extension delivery unit [2] fromthe right door.F-8-1454) Disconnect the connector [1], and remove the reuse band [2]; then, removethe 2 screws (M4x8; RS tightening).[1][2][3][3][3][4]
