Chapter 1010-21F-10-5510.5.4.6 Removing the Control Panel Base Cover 0009-2847iR2230 / / / iR3530 /1) Remove the 4 screws [1], and detach the control panel base cover [2].F-10-5610.5.4.7 Removing the Control Panel Frame 0009-2848iR2230 / / / iR3530 /1)Disconnect the flat cable [1] in the direction of the arrow.2)Move the connector stopper [2] in the direction of the arrow, anddisconnect the flat cable [3].F-10-573)Disconnect the 3 connectors [1].F-10-584)Free the harness from the 3 clamps [1].F-10-595)Remove the 5 screws [1], and detach the control panel hook [2].F-10-606)Remove the self-tapping screws [1] and the flat-head screw [2]; then,detach the control panel frame [3].F-10-61Routing the Harness When Mounting the Control Panel Frame1.Check to be sure that the inverter harness is routed [1] as shown in the fig-ure.F-10-622.After mounting the control panel frame, be sure to route the inverter har-ness through the edge saddle [1].F-10-63
