Chapter 88-21F-8-29[1] Cassette paper sensor[2] Pickup roller (roller A)[3] Feed roller (roller B)[4] Separation roller (roller C)[5] Pickup vertical path roller[6] Cassette retry paper sensor[7] Vertical path guide[8] Lower right cover[9] Holding plate[10] Lifter plate8.4.2 Basic Sequence 0007-7947iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / iR3530 /- Basic Sequence of Operation for Making 3 PrintsF-8-308.4.3 Identifying the Paper Size 0007-8700iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / iR3530 /The size of paper inside the cassette is detected by the cassette size dial, and is communicated to the cassette size detection PCB.As may as 15 positions may be detected with reference to the combinations of on and off states of the array of 4 actuators mounted to the cassette size detectionPCB on the printer side and operating in conjunction with the cassette size dial.In the absence of a cassette, all 4 actuators are off, causing the machine to assume there is no cassette.AB/Inch SwitchThe cassette size dial is equipped with a switch operated to change between AB and Inch configurations; the cassette size detecting switch will detect the configu-ration as soon as a cassette is fitted in the machine.[9][10][7][8][1] [2] [3] [4] [5] [6]Print StartCassette 1 pickup motor(M6)Cassette 1 pickupsolenoid (SL1)Cassette 1 retry sensor(PS10)Main motor (M2)Registration sensor(PS9)Registration clutch(CL2)Fixing motor(M11)Fixing/delivery papersensor (PS13)No.1 delivery motor(M4)Delivery sensor 1(PS14)*1 *3 *2PRINT*1 pickup*3 registration*2 pre-registrationcassette 1 pickup motor rotationincreasedcassette 1: 3 sheets of paper
