Chapter 88-80F-8-3072) Remove the screw [2], and detach the manual feed guide [1].F-8-3083) Remove the connector cover [1] (snap-on).F-8-3094) Disconnect the connector [1].5) Remove the 4 screws [2], and detach the manual feed unit [3].F-8-310F-8-3118.8.16.5 Removing the Manual Feed Pickup Roller 0007-6713iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the manual feed upper cover [1] (snap-on).F-8-3122) Remove the bush [2], and detach the manual feed pickup roller [3]together with the shaft.3) Remove the plastic E-ring [4], and detach the manual feed pickup rollerfrom shaft. Take care not to drop the parallel pin.F-8-3138.8.17 Manual Pick-up Clutch8.8.17.1 Removing the Right Cover (rear) 0007-6675iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-Y2)2) Open the right lower door [2].3) Remove the 5 screws [3], and detach the right cover (rear) [4].[1] [2][3][1][2][1][1] [2] [3]
