Chapter 88-508.8.4.3 Removing the Right Door 0007-7331iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / / iR3530 /1) Open the right door.F-8-1152) Remove the reuse band [1], and disconnect the connector [2].3) Remove the 2 screws (M4x8; RS tightening), and detach the right door.F-8-116Attaching the Right Door1) Match the hinge [1] found at the bottom of the right door against the lug.2) Engage the hinge [2] found on the top of the right door with the hookfound on the side plate.F-8-117When tightening the 2 screws used to fix the hinge in place, be sure to closethe right door first.8.8.4.4 Removing the Right Cover (lower front) 0007-6562iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Open the right door [1] of the pedestal (if a 2-Cassette Pedestal-Y1 isinstalled).2) Open the lower right cover [2].3) Remove the 2 screws, and detach the right cover (lower front) [3].F-8-1188.8.4.5 Removing the Pickup Assembly 1 0007-6564iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Slide out the cassette 1/2.2) Disconnect the 3 connectors [1]; then, free the harness from the 2 wiresaddles [2] and the 2 clamps [3].F-8-1193) Remove the 4 screws [1], and take out the pickup unit 1 [2].F-8-1208.8.4.6 Removing the Pickup Assembly 2 0007-6565iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Slide out the cassette 1/2.2) Disconnect the connector [1], and free the harness from the guide; then,remove the 4 screws [2], and detach the pickup assembly 2 [3].[3][2][1]
