Chapter 1010-29F-10-1175) Free the harness [2] from the clamp [1].F-10-1186) Disconnect the connector [1], and detach the control panel.F-10-11910.5.8.2 Removing the Control Panel Base Cover 0007-7566iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N1) Remove the 4 screws [1], and detach the control panel base cover [2].F-10-12010.5.8.3 Removing the Controller Panel CPU PCB 0007-7567iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N1) Disconnect the 3 connectors [1] of the cable used between control panelPCB and the control panel key switch PCB.2) Disconnect the 2 connectors [2] used between the control panel PCB andthe control panel LCD.Be sure to move the stopper in the direction of the arrow. Each of the 2stoppers has its own direction of movement.3) Disconnect the control panel cable [4].4) Remove the 4 TP screws [5], and detach the control panel PCB [6].F-10-12110.5.8.4 Removing the Control Panel 0009-2837iR2230 / / / iR3530 /1) Open the right door [1].F-10-1222) Remove the 2 screws [1].F-10-1233) Remove the rubber cap [1], and remove the screw [2].4) Slide the control panel in the direction of the arrow.F-10-1245) Disconnect the connector [1], and detach the control panel.
