Chapter 88-78F-8-2944) Disconnect the connector [1].5) Remove the 4 screws [2], and detach the manual feed unit [3].F-8-295F-8-2968.8.16 Manual Pickup Roller8.8.16.1 Removing the Right Cover (rear) 0007-6709iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-Y2)2) Open the right lower door [2].3) Remove the 5 screws [3], and detach the right cover (rear) [4].F-8-2978.8.16.2 Removing the Right Door 0007-6710iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /1) Open the right door.F-8-2982) Remove the screw [1], and detach the fixing plate [2].F-8-2993) Remove the joint shaft [1], and free the extension delivery unit [2] fromthe right door.F-8-3004) Disconnect the connector [1], and remove the reuse band [2]; then, removethe 2 screws (M4x8; RS tightening).[1][1] [2] [3][1][2][3][3][3][4]
