Chapter 99-179.5.4.2 Removing the inside delivery cover unit (new) 0009-9174iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 / / / / /The difference between new and old inside delivery cover unit:New inside delivery cover unit has a grip ring [1] at hinge. In this case, de-tach the cover following the procedure below.F-9-791) Remove the screw [1] and the stepped screw [2], and detach the insidedelivery cover unit [3].F-9-809.5.4.3 Removing the Grounding Plate 0007-7899iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the 2 screws [1], and detach the grounding plate [2].F-9-819.5.4.4 Removing the Fixing Film Cover 0007-7900iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the 3 screws [1], and remove the self-tapping screw [2]; then,detach the fixing film cover [3].F-9-82F-9-83When mounting the fixing film cover unit, be sure to check that it has not rid-den over the emboss [1] indicated by the arrow in the figure before tighteningthe screw.F-9-84F-9-859.5.4.5 Removing the Left Side Plate 0007-7901iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N // iR4570N / iR2230 / / / iR3530 /1) Remove the screw [1], and detach the left side plate cover [2].[1]
