Chapter 1616-3116.6 OPTION (Machine Settings Mode)16.6.1 COPIER16.6.1.1 Copier List 0007-9547iR2270 / iR2870 / iR3570 / iR4570 / / / / iR4570N / iR2230 / / / iR3530 /T-16-51CL-CHK Checking DF clutch operation11) Press CL-CHK to reverse its display.2) Enter a part corresponding number from the ten-key pad.3) Press the OK key.4) Press CL-ON to check DF clutch operation.CL-ON Starting clutch operation1Press CL-ON. Then press the OK key to start clutch operation. Pressthe OK key again to stop the operation.(The operation stops automatically in two seconds but the statuschanges to STOP only when the OK key is pressed again.)SL-CHK Checking ADF solenoid operation11) Press SL-CHK to reverse its display.2) Enter a part corresponding number from the ten-key pad.3) Press the OK key.4) Press SL-ON to check ADF solenoid operation.Part corresponding number0: Pressurizing solenoid1: Stamping solenoid[Value at shipping: Factory adjustment value / Value after RAMclearance: 0]SL-ON Starting solenoid operation1Operation specifications shall differ depending on the model.1) Press SL to reverse its display. Then press the OK key to startsolenoid operation.2) Press the OK key again to stop the operation.(The operation stops automatically in five seconds but the statuschanges to STOP only when the OK key is pressed again.)MTR-ON Starting motor operation1Operation specifications shall differ depending on the model.1) Press MTR-ON to reverse its display. Then press the OK key tostart motor operation.2) Press the OK key again to stop the operation.(The operation stops automatically in five seconds but the statuschanges to STOP only when the OK key is pressed again.)ROLL-CLN Cleaning the ADF roller1While the roller is being rotated automatically by a motor, pressalcohol-moistened lens cleaning paper against the roller forcleaning.1) Press ROLL-CLN to reverse its display.2) While the roller is rotating, press alcohol-moistened lens cleaningpaper against the roller for cleaning.3) Press ROLL-CLN to reverse its display. Press the OK key to stopthe roller.FEED-ON Checking ADF paper feed operation11) Press FEED-ON and then the OK key to start paper feed in theoperation mode set by FEED-CHK.COPIER > OPTION > BODYSub-item Description LevelMODEL-SZ Switching regular resized display and ADF document size detection10: AB (6R5E) [Default]1: INCH (5R4E)2: A (3R3E)3: AB/INCH (6R5E)FEEDER >FUNCTIONSub-item Description Level
