Chapter 1717-26F-17-473) When the downloading session has ended, click [OK].F-17-484) When you are done, turn off and then on the main power of the machine (iR4570/3570, 2870/2270 Series).5) See the status of upgrading indicated on the control panel of the machine (iR4570/3570, 2870/2270 Series). When a message appears asking you to turn off andthen on the machine, turn off and then on the main power (iR4570/570, 2870/2270 Series).You will not be able to download G3Fax twice in succession. (Once downloading is executed, the board will be reset, causing download mode to end.)Be sure never to turn off the machine while it is executing a downloading session or writing downloaded system software. Otherwise, the write operation (to theflash ROM DIMM of the G3 fax board) may fail, preventing board functions. In the event the board fails to function, be sure to replace the flash ROM DIMM foundon the G3 fax board.17.4.9 Uploading and Downloading Backup Data17.4.9.1 Outline 0008-7845iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N / / iR4570N / iR2230 / / / iR3530SramImg is data that is stored in the SRAM of the main controller PCB, while MeapBack is a MEAP application and its data stored on the HDD.T-17-5Backup data Files to select for downloading/uploadingMain controller PCB backup RAM SramImg.binMEAP application MeapBack.binfor R&D Sublog.txt
