Chapter 66-4F-6-56.3.1.2 Main Scanning Synchronous Control 0006-5974iR2270 / iR2870 / iR3570 / iR4570 / iR2230 / / / iR3530 /The synchronous control in the main scanning direction is performed in the synch circuit based on the BD synch signal.Using the BD signal generated based on the light from laser A, the DC controller PCB generates the BD synch signal for laser A and the BD synch signal for laser B.The image data written to line memory is read out by the readout enable signal (RE_A, RE_B) generated based on the BD synch signal (BD_A, BD_B) for outputto the laser driver PCB.F-6-6[1] Sync circuit[2] Delay circuit[3] Line memory[4] VDO[5] VDO signal processing block[6] Laser driver PCBBD_A/B : BD synch signalRE_A/B : readout enable signalMemo:J318DC-CONCNT0CNT1CNT2J318 J316J301MN-CON[3][3][2]DC-CONBD_ARE_ABD_BBD[1]RE_B[6][5][4]
