Chapter 22-36F-2-13012) Mount the heater PCB [1].- 1 screw [2] (the one removed in the step 10).)F-2-13113) Fit the DC connector [2] to the PCB segment [1]; then, route it through the edge saddle [3].F-2-13214) Secure the AC harness [1] of the heater with the edge saddle [2] and the 2 wire saddles [3].F-2-13315) Fit the 2 AC connectors [2] to the PCB segment [1]; then, route it through the edge saddle [3].16) Fit the AC connector [4] to the PCB segment [1]; then, route it through the edge saddle [5].When fitting the AC connector [4], do not get the cable [6] caught.[1][1][2][1][2][3][1] [2][3]
