Panasonic KX-NCP500 manuals
KX-NCP500
Table of contents
- system components
- safety notices
- important information
- important safety instructions
- Table Of Contents
- Table Of Contents
- main unit
- system connection diagram
- optional equipment
- specifications
- system capacity
- maximum optional service cards
- maximum co lines and extensions
- maximum terminal equipment
- digital extra device port (digital xdp) connection capacity
- activation keys
- activation key code and key management system
- activation key file
- before installation
- wiring precautions
- installation of the pbx
- names and locations
- frame ground connection
- installing/removing the optional service cards
- types of connectors
- attaching a ferrite core
- inch rack mounting
- floor standing
- surge protector installation
- DSP4 Card (KX-NCP1104), DSP16 Card (KX-TDE0110), and DSP64 Card
- rmt card (kx-tda)
- information about the virtual cards
- information about the physical co line cards
- t1 card (kx-ncp)
- pri23 card (kx-ncp)
- information about the physical extension cards
- dlc8 card (kx-ncp)
- dlc16 card (kx-ncp)
- slc8 card (kx-ncp)
- slc16 card (kx-ncp)
- information about the other physical cards
- dph4 card (kx-tda)
- eio4 card (kx-tda)
- external sensor
- echo16 card (kx-tda)
- MSG4 Card (KX-TDA0191)
- ESVM4 Card (KX-TDA0194)
- Connection of Extensions
- Parallel Connection of the Extensions
- Digital EXtra Device Port (Digital XDP) Connection
- First Party Call Control CTI Connection
- Connection of Doorphones, Door Openers, External Sensors, and External Relays
- Connection of Peripherals
- LAN Connection
- Power Failure Connections
- Starting the PBX
- Overview
- PC Connection
- external modem connection
- Installation of the Maintenance Console
- Troubleshooting
- Connection
- Operation
- Using the Reset Button
- Troubleshooting by Error Log
- Revision History
- PBMPR Software File Version 2.02xx
- PBMPR Software File Version 4.1xxx
- PBMPR Software File Version 5.0xxx
- Document Version 2011-10 Installation Manual
- Index
- product service
KX-NCP500
Table of contents
- Table Of Contents
- Introduction
- Overview
- Network Management
- VLAN (Virtual LAN)
- Gatekeeper
- Packet Control Features
- Guidance for VoIP Installation
- Bandwidth Assessment
- additional information
- Network Configuration
- Network Devices
- QoS (Quality of Service)
- VoIP Requirements Checklist
- Connection to the LAN
- Connecting the IPCMPR Card to the LAN
- Connecting the IP Telephones
- Programming
- Programming the PBX
- Installing Additional Activation Keys
- Programming the Virtual 16-Channel VoIP Gateway Card
- Programming the Address Translation Table
- Programming the Network Settings
- Programming the IPCMPR Card
- Programming the IP Telephones
- Setting the VLAN Parameters
- Setting the Diffserv Parameters
- Configuration of IP Ports
- Registering IP Telephones
- parameter description
- De-registering IP Telephones
- Appendix
- Revision History
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 2.02xx
- Error Message
KX-NCP500
Table of contents
- Table Of Contents
- Introduction
- Overview
- network parameters
- Network Management
- VLAN (Virtual LAN)
- Gatekeeper
- Packet Control Features
- Guidance for VoIP Installation
- VoIP Requirements
- additional information
- Network Configuration
- Network Devices
- QoS (Quality of Service)
- VoIP Requirements Checklist
- Connection to the LAN
- Connecting the MPR/IP-EXT16 Card to the LAN
- Connecting the IP Telephones
- Programming
- Programming the PBX
- Installing Additional Activation Keys
- configuration of the activation keys
- Programming the Virtual 16-Channel VoIP Gateway Card
- Programming the Address Translation Table
- Programming the Network Settings
- Programming the MPR Card
- Programming the IP-EXT16 Card (KX-TDE series only)
- Programming the IP Telephones
- Setting the VLAN Parameters
- Setting the Diffserv Parameters
- Configuration of IP Ports
- Registering IP Telephones
- De-registering IP Telephones
- Appendix
- Revision History
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 2.02xx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 3.0xxx
- KX-TDE600 PGMPR Software File Version 3.0xxx
- Error Message
KX-NCP500
Table of contents
- user manual
- feature highlights
- safety notices
- important safety instructions
- important information
- User Manual
- Table Of Contents
- Operation
- Before Operating the Telephones
- flexible buttons
- soft buttons
- connection example
- Making Calls
- Easy Dialling
- Redial
- When the Dialled Line is Busy or There is No Answer
- Accessing the ISDN Service (ISDN Service Access)
- Calling without Restrictions
- To Access Another Party Directly from Outside (Direct Inward System Access DISA])
- Setting Your Telephone from Another Extension or through DISA (Remote Setting)
- Receiving Calls
- Answering Hands-free (Hands-free Answerback)
- Answering a Call Ringing at Another Telephone (Call Pickup)
- Answering a Call via an External Speaker (Trunk Answer From Any Station TAFAS])
- Using the ANSWER/RELEASE Button
- Identifying Malicious Calling Parties (Malicious Call Identification [MCID])
- During a Conversation
- Holding a Call
- Talking to Two Parties Alternately (Call Splitting)
- Answering Call Waiting
- Multiple Party Conversation
- Mute
- Letting Other People Listen to the Conversation (Off-hook Monitor)
- Using the Headset (Headset Operation)
- Using a PDN/SDN Button
- Before Leaving Your Desk
- Using Voice Messaging (Built-in Simplified Voice Message [SVM])
- Showing a Message on the Caller's Telephone Display (Absent Message)
- Preventing Other People from Using Your Telephone (Extension Dial Lock)
- Making/Answering an Announcement
- Answering/Denying a Paging Announcement
- Making a Conference Group Call
- push-to-talk for ps users
- starting a conference group call using hands-free answerback
- Setting the Telephone According to Your Needs
- Refusing Incoming Calls (Do Not Disturb [DND])
- Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)
- Displaying Your Telephone Number on the Called Party and Caller's Telephone (Calling Connected Line Identification Presentation [CLIP/COLP])
- Preventing Your Number Being Displayed on the Called Party's Telephone (Calling Line Identification Restriction [CLIR])
- Preventing Other People from Joining Your Conversation (Executive Busy Override Deny)
- Turning on the Background Music (BGM)
- Protecting Your Line against Notification Tones (Data Line Security)
- Checking the Time Service Status
- Setting the Parallelled Telephone to Ring (Parallelled Telephone)
- Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode)
- Clearing Features Set at Your Extension (Extension Feature Clear)
- Utilising the Call Centre
- Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution Group Monitor)
- Forwarding a Waiting Call (Manual Queue Redirection)
- Using User-supplied Equipment
- If an External Relay is Connected
- If an External Sensor is Connected
- If a Host PBX is Connected
- If a Voice Processing System is Connected
- before operating
- Administrative Features
- Recording Information Using Preprogrammed Messages (Printing Message)
- Exchanging the Settings between Extensions
- Enhanced Walking Extension
- Using a Display Proprietary Telephone
- Using the Directories
- storing names and numbers
- entering characters
- Accessing System Features (System Feature Access)
- Using an IP Proprietary Telephone
- Using a KX-HGT100 SIP Extension
- Speed Dialling
- Displaying Your Telephone Number on the Called Party's Telephone
- Cellular Phone Features
- Manager Operation
- Control Features
- Time Service Mode Control
- Restriction Level Control (Dial Tone Transfer)
- Turning on the External Background Music (BGM)
- Recording Outgoing Messages (OGM)
- Allowing Users to Seize an Unavailable Outside Line (Trunk Busy Out)
- Releasing Network Direct Station Selection (NDSS) Monitor
- customising your phone & system
- Customising Your Phone (Personal Programming)
- Settings on the Programming Mode
- clearing features
- Customising the Buttons
- Manager Programming
- Customising Your System (System Programming)
- fixed buttons
- System Programming
- Appendix
- Troubleshooting
- Feature Number Table
- What is This Tone
- Revision History
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 4.1xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 2.01xx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 3.0xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 4.1xxx
- KX-TDE600 PGMPR Software File Version 3.0xxx
- KX-TDE600 PGMPR Software File Version 4.1xxx
- Index
KX-NCP500
Table of contents
- user manual
- feature highlights
- safety notices
- important information
- important safety instructions
- User Manual
- Table Of Contents
- Operation
- Before Operating the Telephones
- when you use a panasonic proprietary telephone
- connection example
- Making Calls
- Easy Dialling
- Redial
- When the Dialled Line is Busy or There is No Answer
- Accessing the ISDN Service (ISDN Service Access)
- Calling without Restrictions
- To Access Another Party Directly from Outside (Direct Inward System Access DISA])
- Setting Your Telephone from Another Extension or through DISA (Remote Setting)
- Receiving Calls
- Answering Hands-free (Hands-free Answerback)
- Answering a Call Ringing at Another Telephone (Call Pickup)
- Answering a Call via an External Speaker (Trunk Answer From Any Station TAFAS])
- Using the ANSWER/RELEASE Button
- Identifying Malicious Calling Parties (Malicious Call Identification [MCID])
- During a Conversation
- Holding a Call
- Talking to Two Parties Alternately (Call Splitting)
- Answering Call Waiting
- Multiple Party Conversation
- Mute
- Letting Other People Listen to the Conversation (Off-hook Monitor)
- Using the Headset (Headset Operation)
- Using a PDN/SDN Button
- Before Leaving Your Desk
- Using Voice Messaging (Built-in Simplified Voice Message [SVM])
- Showing a Message on the Caller's Telephone Display (Absent Message)
- Preventing Other People from Using Your Telephone (Extension Dial Lock)
- Making/Answering an Announcement
- Answering/Denying a Paging Announcement
- Making a Conference Group Call
- Setting the Telephone According to Your Needs
- Refusing Incoming Calls (Do Not Disturb [DND])
- Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)
- Displaying Your Telephone Number on the Called Party and Caller's Telephone (Calling Connected Line Identification Presentation [CLIP/COLP])
- Preventing Your Number Being Displayed on the Called Party's Telephone (Calling Line Identification Restriction [CLIR])
- Preventing Other People from Joining Your Conversation (Executive Busy Override Deny)
- Turning on the Background Music (BGM)
- Protecting Your Line against Notification Tones (Data Line Security)
- Checking the Time Service Status
- Setting the Parallelled Telephone to Ring (Parallelled Telephone)
- Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode)
- Clearing Features Set at Your Extension (Extension Feature Clear)
- Utilising the Call Centre
- Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution Group Monitor)
- Forwarding a Waiting Call (Manual Queue Redirection)
- Using User-supplied Equipment
- If an External Relay is Connected
- If an External Sensor is Connected
- If a Host PBX is Connected
- If a Voice Processing System is Connected
- before operating
- Administrative Features
- Recording Information Using Preprogrammed Messages (Printing Message)
- Exchanging the Settings between Extensions
- Enhanced Walking Extension
- Using a Display Proprietary Telephone
- Using the Directories
- storing names and numbers
- entering characters
- Accessing System Features (System Feature Access)
- Using an IP Proprietary Telephone
- Using a KX-HGT100 SIP Extension
- Speed Dialling
- Displaying Your Telephone Number on the Called Party's Telephone
- Cellular Phone Features
- transferring to a private network (tie line access)
- Manager Operation
- Control Features
- Time Service Mode Control
- Restriction Level Control (Dial Tone Transfer)
- Turning on the External Background Music (BGM)
- Recording Outgoing Messages (OGM)
- Allowing Users to Seize an Unavailable Outside Line (Trunk Busy Out)
- Releasing Network Direct Station Selection (NDSS) Monitor
- customising your phone & system
- Customising Your Phone (Personal Programming)
- Settings on the Programming Mode
- clearing features
- Customising the Buttons
- Manager Programming
- Customising Your System (System Programming)
- fixed buttons
- System Programming
- Appendix
- Troubleshooting
- Feature Number Table
- What is This Tone
- Revision History
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 4.1xxx
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 5.0xxx
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 6.0xxx
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 7.xxxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 2.01xx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 3.0xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 4.1xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 5.0xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 6.0xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 7.xxxx
- KX-TDE600 PGMPR Software File Version 3.0xxx
- KX-TDE600 PGMPR Software File Version 4.1xxx
- KX-TDE600 PGMPR Software File Version 5.0xxx
- KX-TDE600 PGMPR Software File Version 6.0xxx
- KX-TDE600 PGMPR Software File Version 7.xxxx
- Index
KX-NCP500
Table of contents
- user manual
- User Manual
- safety notices
- important safety instructions
- important information
- Table Of Contents
- Operation
- Before Operating the Telephones
- your extension number
- flexible buttons
- Making Calls
- Easy Dialling
- Redial
- When the Dialled Line is Busy or There is No Answer
- Accessing the ISDN Service (ISDN Service Access)
- Calling without Restrictions
- To Access Another Party Directly from Outside (Direct Inward System Access DISA])
- to call an outside party
- Setting Your Telephone from Another Extension or through DISA (Remote Setting)
- Receiving Calls
- Answering Hands-free (Hands-free Answerback)
- Answering a Call Ringing at Another Telephone (Call Pickup)
- Answering a Call via an External Speaker (Trunk Answer From Any Station TAFAS])
- Using the ANSWER/RELEASE Button
- Identifying Malicious Calling Parties (Malicious Call Identification [MCID])
- During a Conversation
- transferring to an outside party using the pbx service
- Holding a Call
- Talking to Two Parties Alternately (Call Splitting)
- Answering Call Waiting
- Multiple Party Conversation
- Mute
- Letting Other People Listen to the Conversation (Off-hook Monitor)
- Using the Headset (Headset Operation)
- Using a PDN/SDN Button
- Before Leaving Your Desk
- Using Voice Messaging (Built-in Simplified Voice Message [SVM])
- Showing a Message on the Caller's Telephone Display (Absent Message)
- Preventing Other People from Using Your Telephone (Extension Dial Lock)
- Making/Answering an Announcement
- Answering/Denying a Paging Announcement
- Setting the Telephone According to Your Needs
- Refusing Incoming Calls (Do Not Disturb [DND])
- Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)
- Displaying Your Telephone Number on the Called Party and Caller's Telephone (Calling Connected Line Identification Presentation [CLIP/COLP])
- Preventing Your Number Being Displayed on the Called Party's Telephone (Calling Line Identification Restriction [CLIR])
- Preventing Other People from Joining Your Conversation (Executive Busy Override Deny)
- Turning on the Background Music (BGM)
- Protecting Your Line against Notification Tones (Data Line Security)
- Checking the Time Service Status
- Setting the Parallelled Telephone to Ring (Parallelled Telephone)
- Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode)
- Clearing Features Set at Your Extension (Extension Feature Clear)
- Utilising the Call Centre
- Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution Group Monitor)
- Forwarding a Waiting Call (Manual Queue Redirection)
- Using User-supplied Equipment
- If an External Relay is Connected
- If an External Sensor is Connected
- If a Host PBX is Connected
- If a Voice Processing System is Connected
- Administrative Features
- check out
- Recording Information Using Preprogrammed Messages (Printing Message)
- Exchanging the Settings between Extensions
- Enhanced Walking Extension
- Using a Display Proprietary Telephone
- Using the Directories
- storing names and numbers
- entering characters
- Accessing System Features (System Feature Access)
- Using an IP Proprietary Telephone
- Manager Operation
- Control Features
- Time Service Mode Control
- Restriction Level Control (Dial Tone Transfer)
- Turning on the External Background Music (BGM)
- Recording Outgoing Messages (OGM)
- Allowing Users to Seize an Unavailable Outside Line (Trunk Busy Out)
- Releasing Network Direct Station Selection (NDSS) Monitor
- customising your phone & system
- Customising Your Phone (Personal Programming)
- Settings on the Programming Mode
- Customising the Buttons
- Manager Programming
- Customising Your System (System Programming)
- fixed buttons
- System Programming
- Appendix
- Troubleshooting
- Feature Number Table
- What is This Tone
- Index
KX-NCP500
Table of contents
- pc programming manual
- safety notices
- PC Programming Manual
- Table of Contents
- Table Of Contents
- Overview
- Introduction
- Entering Characters
- PC Programming
- Password Security
- Introduction of Maintenance Console
- Access Levels
- Software Interface
- main window
- Card Status
- Display Options
- Program launcher
- program launcher—connect—usb
- program launcher—connect—modem
- program launcher—connect—profile setup
- File
- Disconnect
- Tool
- tool—call pickup for my group
- tool—screen customize—user level/administrator level
- Utility
- utility—file transfer pc to pbx (sd card)
- utility—file transfer pbx (sd card) to pc
- utility—sd card file view and load
- utility—sd card file delete
- utility—error log
- utility—t1 signaling bit monitor
- utility—v-ipgw16 protocol trace
- utility—ip extension statistical information
- utility—cs information
- utility—ps information
- utility—file transfer ftp to ip equipment—ip-cs/nt
- utility—card software timed update
- utility—system reset—reset by the command
- utility—flash rom id information
- Help
- Configuration
- Slot
- lan setting
- subnet mask
- ip extension count of bgm
- dhcp client
- port status
- leading number
- mac address
- slt power supply (kx-tde series only)
- caller id—caller id signaling
- extension setting
- network configuration
- network type
- Portable Station
- Option
- Clock Priority
- System
- daylight saving
- pbx operator—day, lunch, break, night
- bgm and music on hold—music on hold
- dial—analog co call duration start
- recall—transfer recall
- tone length—busy tone / dnd tone
- timed reminder—repeat counter
- timed reminder—interval time
- unattended conference—warning tone start timer
- caller id—visual caller id display
- svm—recording time
- conference group call—ring duration
- Week Table
- Holiday Table
- idle line access (local access)
- trunk group access
- system speed dialing / personal speed dialing
- personal speed dialing - programming
- single co line access
- tafas answer
- sip refer (blind)
- message waiting set / cancel / call back
- manual call waiting for extension call
- not ready (manual wrap-up) mode on / off
- incoming call queue monitor
- remote timed reminder (remote wakeup call)
- time service (day / lunch / break / night) switch
- simplified voice message access
- trs level—day, lunch, break, night
- trs level for system speed dialing
- co & smdr
- transfer to co
- outgoing co call printout (smdr)
- dnd override
- transfer to busy extension w/o bss operation
- time service switch
- door unlock
- System Options
- pt operation—one-touch busy override by sco key
- extension - co call limitation—for incoming call
- confirmation tone—tone 4-1 : start conference
- dial tone—distinctive dial tone
- echo cancel—conference
- dss key—automatic transfer for extension call
- send clip of co caller—when call is transferred to co (clip of held party)
- send clip of co caller—when call is forwarded to co
- slt—message waiting lamp pattern (kx-tde series only)
- isdn option—calling party name presentation to pri
- built-in communication assistant—system status retry counter
- cti hold—forced idle when hold by pdn/sdn key
- incoming call log—fwd all / fwd busy
- Extension CID Settings
- paging—epg 2 (external pager 2) (kx-tde series only)
- line hunting order
- disa tone detection—silence
- disa tone detection—cyclic
- simplified voice message tone detection—continuous
- Caller ID Modification
- Dialing Plan
- Extension Group
- Call Pickup Group
- Paging Group
- overflow queuing busy
- overflow no answer
- queuing time table
- extension no answer redirection time
- maximum no. of busy extension
- delayed ring
- options—longest idle distribution (activation key required)
- Extension Hunting Group
- call waiting on vm group
- overflow to mailbox for call to icd group
- vm dtmf command—listening message
- others—call waiting on vm group
- PS Ring Group
- Conference Group
- Extension
- absent message
- display lock / svm lock
- slt mw mode (kx-tde series only)
- svm lock
- optional parameter (or ringing tone type number) (for time service)
- DSS Console
- Optional Device
- Doorphone
- External Pager
- timed reminder message—day, lunch, break, night
- recording mode
- remote access
- External Relay
- External Sensor
- tenant no
- Feature
- System Speed Dial
- co line access number + telephone number
- Hotel
- smdr for external hotel application 1—timed reminder (wake-up call)
- Verification Code
- Second Dial Tone
- Absent Message
- Tenant
- system speed dial
- Denied Code
- Exception Code
- Special Carrier
- Emergency Dial
- Miscellaneous
- dial digits limitation after answering—dial digits
- System Setting
- Leading Number
- Routing Plan Time
- Routing Plan Priority
- Carrier
- Leading Number Exception
- Authorization Code for TRG
- Private Network
- TIE Table
- Network Data Transmission
- Network Operator (VoIP)
- NDSS Key Table
- CO Line Settings
- dil destination—day, lunch, break, night
- cli for dil
- cli ring for dil—day, lunch, break, night
- DID Table
- Maintenance
- Main
- print information—error log
- smdr options
- communication—baud rate
- communication—parity bit
- communication—stop bit
- local alarm display—extension 1, extension
- daily test start time—minute
- PT Programming Access
- Power Failure Transfer
- Air Synchronization
- Appendix
- Revision History
- 14.1.3 KX-NCP500/KX-NCP1000 PBMPR Software File Version 4.1xxx
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 4.1xxx
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 4.2xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 2.0xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 2.01xx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 4.1xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 4.2xxx
- KX-TDE600 PGMPR Software File Version 3.0xxx
- KX-TDE600 PGMPR Software File Version 4.1xxx
- KX-TDE600 PGMPR Software File Version 4.2xxx
- KX-TDE600 PGMPR Software File Version 5.0xxx
- Feature Programming References
- call park
- Call Transfer
- call transfer
- Table Of Contents
- Table Of Contents
- Table Of Contents
- external relay
- icd group features—group call distribution
- Table Of Contents
- Table Of Contents
- led indication
- Table Of Contents
- music on hold
- power failure transfer
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- upgrading the software
KX-NCP500
Table of contents
- getting started
- Table Of Contents
- Before Installation
- Safety Notices
- Installation
- Installing the DSP Card
- installing the dsp card
- Inserting the SD Memory Card to the IPCMPR Card
- Connecting to the LAN
- Connecting the IP Telephones to the LAN
- Before Programming
- Starting the PBX
- Connecting the PC
- Installing the Maintenance Console
- Programming
- Programming the PBX
- Installing the Virtual IP Cards to the PBX
- Installing Additional Activation Keys
- configuration of the activation keys
- Programming the Virtual 16-Channel VoIP Gateway Card
- Programming the Address Translation Table
- Programming the Network Settings
- Programming the Virtual Extension Card and IP Telephones
- Registering IP Telephones
- Confirming the Connection
- Making and Receiving Calls
- Appendix
- Revision History
KX-NCP500
Table of contents
- pc programming manual
- safety notices
- PC Programming Manual
- Table Of Contents
- Overview
- Introduction
- Entering Characters
- PC Programming
- Password Security
- Introduction of Maintenance Console
- Access Levels
- Software Interface
- Card Status
- Display Options
- Extension Number Setting
- Programme launcher
- programme launcher—open
- programme launcher—connect—rs-232c
- programme launcher—connect—usb
- programme launcher—connect—lan
- programme launcher—connect—modem
- programme launcher—connect—isdn remote
- programme launcher—connect—profile setup
- File
- file—save as
- Disconnect
- Tool
- tool—bri automatic configuration
- tool—ndss link data clear
- tool—dxdp all ous
- tool—simplified voice message—delete all recording
- tool—simplified voice message—check current usage
- tool—call pickup for my group
- tool—extension list view
- tool—screen customize—user level/administrator level
- Utility
- utility—file transfer pc to pbx (sd card)
- system data
- utility—file transfer pbx (sd card) to pc
- utility—sd card file view and load
- utility—sd card file delete
- utility—message file transfer pc to pbx
- utility—message file transfer pbx to pc
- utility—error log
- utility—t1/e1 signalling bit monitor
- utility—t1/e1 line trace
- utility—isdn/qsig protocol trace
- utility—v-ipgw16 protocol trace
- utility—digital trunk error report
- utility—ip extension statistical information
- utility—cs information
- utility—ps information
- utility—cs status monitor
- utility—file transfer ftp to ip equipment—ip-cs/nt
- utility—file transfer ftp to ip equipment—nt3xx
- utility—card software timed update
- utility—system reset—reset by the command
- Help
- Configuration
- Slot
- lan setting
- ip extension count of bgm
- dhcp client
- call distribution port group
- outgoing call
- incoming call
- leading number
- ringing tone
- mac address
- slt power supply (kx-tde series only)
- hook threshold pd a-law (kx-tde600 only)
- telephone type
- caller id—caller id signalling
- dialling mode
- pause time
- flash time
- network type
- network configuration
- device type
- Portable Station
- Option
- Clock Priority
- System
- automatic time adjustment
- recall—transfer recall
- tone length—busy tone / dnd tone
- doorphone—call ring duration
- pt display—pt last display duration in idle mode
- system wireless—ps out of range timer
- svm—dial tone continuous time
- Week Table
- Holiday Table
- operator call
- doorphone call
- external bgm on / off
- group call pickup
- account code entry
- door open
- external feature access
- message waiting set / cancel / call back
- walking extension
- manual call waiting for extension call
- incoming call queue monitor
- bgm set / cancel
- printing message
- extension feature clear
- simplified voice message access
- other pbx extension
- phone number
- executive busy override
- message waiting set
- trs level—day, lunch, break, night
- co & smdr
- dnd override
- transfer to busy extension w/o bss operation
- call monitor
- executive busy override deny
- programming mode level
- door unlock
- System Options
- co - co call limitation—after conference
- dial tone—distinctive dial tone
- dss key—call pick-up by dss key for icd group call
- dss key—automatic transfer for extension call
- system wireless—out of range registration
- slt—message waiting lamp pattern (kx-tde series only)
- call waiting—automatic call waiting for extension call
- isdn option—calling party name sending format
- cti hold—forced idle when hold by pdn/sdn key
- Extension CID Settings
- moh—moh 2 (music on hold 2) (kx-tde series only)
- group name
- simplified voice message tone detection—silence
- simplified voice message tone detection—cyclic
- Caller ID Modification
- Dialling Plan
- User Group
- Call Pickup Group
- Paging Group
- external pager
- overflow queuing busy
- overflow no answer
- Extension Hunting Group
- floating extension no
- vm dtmf command—listening message
- floating ext. no
- PS Ring Group
- Conference Group
- Extension
- call pickup deny
- display language
- paging deny
- slt mw mode (kx-tde series only)
- font size
- DSS Console
- Optional Device
- Doorphone
- External Pager
- remote access
- External Relay
- External Sensor
- Feature
- System Speed Dial
- co line access number + telephone number
- charge options—digits after decimal point
- charge options—action at charge limit
- Verification Code
- itemised billing code for ars
- budget management
- Second Dial Tone
- Absent Message
- Tenant
- system speed dial
- Denied Code
- Exception Code
- Special Carrier
- Emergency Dial
- Miscellaneous
- System Setting
- Leading Number
- Routing Plan Time
- Routing Plan Priority
- Carrier
- Leading Number Exception
- Authorisation Code for TRG
- Private Network
- TIE Table
- Network Data Transmission
- Network Operator (VoIP)
- NDSS Key Table
- CO Line Settings
- co name
- ddi/did/tie/msn—remove digit
- DDI / DID Table
- MSN Table
- Maintenance
- Main
- remote—analogue remote (modem) floating extension number
- remote—isdn remote floating extension number
- system password - pt programming—prog ** : user level
- system password - pt programming—prog *# : administrator level
- PT Programming Access
- Power Failure Transfer
- community name
- Air Synchronisation
- Appendix
- Revision History
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 4.1xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 2.0xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 2.01xx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 3.0xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 4.1xxx
- KX-TDE600 PGMPR Software File Version 3.0xxx
- KX-TDE600 PGMPR Software File Version 4.1xxx
- Feature Programming References
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- manager features
- Table Of Contents
- Table Of Contents
KX-NCP500
Table of contents
- operating manual
- feature highlights
- safety notices
- important safety instructions
- important information
- Operating Manual
- Table Of Contents
- Operation
- Before Operating the Telephones
- your extension number
- when you use a panasonic proprietary telephone
- customized buttons
- connection example
- Basic Operations
- operator call
- Answering Calls
- Telephone Features and Operation
- Account Code Entry
- Automatic Callback Busy (Camp-on)
- automatic callback busy cancel
- BGM (Background Music)
- call hold retrieve
- Call Monitor
- Call Pickup
- Call Splitting
- Call Transfer
- CALL WAITING FEATURES
- customizing your phone
- Call Waiting Tone
- Character Entry
- Conference
- Conference, Unattended
- Conference Group Call
- Data Line Security
- DISA (Direct Inward System Access)
- DND (Do Not Disturb)
- dnd override
- Door Open
- Doorphone Call
- EFA (External Feature Access)
- Extension Dial Lock
- Extension Feature Clear
- Extension PIN (Personal Identification Number)
- External Relay
- External Sensor
- Hands-free Answerback
- Hands-free Operation
- headset operation
- to transfer a call
- HOSPITALITY FEATURES
- ICD GROUP FEATURES
- icd group features—call log history for icd group
- icd group features—incoming call queue monitor
- icd group features—log-in/log-out
- icd group features—manual queue redirection
- Message Waiting
- Mute
- OHCA (Off-hook Call Announcement)
- Paging
- Paralleled Telephone
- PDN (Primary Directory Number)/SDN (Secondary Directory Number Extension
- Printing Message
- Privacy Release
- private network features—tie line access
- Quick Dialing
- Self Labeling (KX-NT366 only)
- Speed Dialing, Personal
- Speed Dialing, System
- TAFAS (Trunk Answer From Any Station)
- Timed Reminder
- Time Service
- Verification Code Entry
- voice mail features—lcs (live call screening)
- voice mail features—two-way record
- voice mail features—voice mail integration
- Wake-up Call
- Walking COS
- Walking Extension
- Walking Extension, Enhanced
- Whisper OHCA
- Wireless XDP Parallel Mode
- Display Features
- Call Log, Outgoing
- Directories
- System Feature Access
- external bgm
- Using a KX-HGT100 SIP Extension
- Speed Dialing
- Cellular Phone Features
- Manager Operation
- Manager Service Features
- OGM (Outgoing Messages)
- Remote Extension Dial Lock
- customizing your phone & system
- Personal Programming
- Programming Feature Clear
- Customizing the Buttons
- Manager Programming
- System Programming
- fixed buttons
- Appendix
- Troubleshooting
- Feature Number Table
- Tone
- Revision History
- KX-TDE100/KX-TDE200 PMMPR Software File Version 3.0xxx
- KX-TDE600 PGMPR Software File Version 4.1xxx
- Index
- Table Of Contents
- Table Of Contents
- Table Of Contents
KX-NCP500
Brand: Panasonic | Category: Telephone System
Table of contents
- operating manual
- feature highlights
- safety notices
- important safety instructions
- important information
- Operating Manual
- Table Of Contents
- Operation
- Before Operating the Telephones
- your extension number
- flexible buttons
- customized buttons
- connection example
- Basic Operations
- operator call
- Answering Calls
- Telephone Features and Operation
- Account Code Entry
- Automatic Callback Busy (Camp-on)
- automatic callback busy cancel
- BGM (Background Music)
- Call Monitor
- Call Pickup
- Call Splitting
- Call Transfer
- CALL WAITING FEATURES
- customizing your phone
- Call Waiting Tone
- Character Entry
- Conference
- Conference, Unattended
- Data Line Security
- DISA (Direct Inward System Access)
- DND (Do Not Disturb)
- dnd override
- Door Open
- Doorphone Call
- EFA (External Feature Access)
- Extension Dial Lock
- Extension Feature Clear
- Extension PIN (Personal Identification Number)
- External Relay
- External Sensor
- Hands-free Answerback
- Hands-free Operation
- HOSPITALITY FEATURES
- ICD GROUP FEATURES
- icd group features—call log history for icd group
- icd group features—incoming call queue monitor
- icd group features—log-in/log-out
- icd group features—manual queue redirection
- Message Waiting
- Mute
- OHCA (Off-hook Call Announcement)
- Paging
- Paralleled Telephone
- PDN (Primary Directory Number)/SDN (Secondary Directory Number Extension
- Printing Message
- Privacy Release
- private network features—tie line access
- Quick Dialing
- Redial, Last Number
- Self Labeling (KX-NT366 only)
- Speed Dialing, Personal
- Speed Dialing, System
- TAFAS (Trunk Answer From Any Station)
- Time Service
- Verification Code Entry
- voice mail features—lcs (live call screening)
- voice mail features—two-way record
- voice mail features—voice mail integration
- Wake-up Call
- Walking COS
- Walking Extension
- Walking Extension, Enhanced
- Whisper OHCA
- Wireless XDP Parallel Mode
- Display Features
- Call Log, Outgoing
- Directories
- System Feature Access
- external bgm
- Using a KX-HGT100 SIP Extension
- Speed Dialing
- Cellular Phone Features
- Manager Operation
- Manager Service Features
- Remote Extension Dial Lock
- Personal Programming
- Programming Feature Clear
- Customizing the Buttons
- Manager Programming
- System Programming
- fixed buttons
- Appendix
- Troubleshooting
- Feature Number Table
- Tone
- Revision History
- Index
- Table Of Contents
- Table Of Contents
- Table Of Contents
KX-NCP500
Table of contents
- feature manual
- Feature Manual
- Table Of Contents
- Table Of Contents
- Absent Message
- Account Code Entry
- ARS (Automatic Route Selection)
- itemized billing code
- Automatic Callback Busy (Camp-on)
- Automatic Extension Release
- Automatic Time Adjustment
- BGM (Background Music)
- CA (Communication Assistant)
- Caller ID
- Call Hold
- Call Log, Incoming
- Call Monitor
- Call Park
- Call Pickup
- Call Splitting
- Call Transfer
- CALL WAITING FEATURES
- Call Waiting Tone
- CELLULAR PHONE FEATURES
- CLIP (Calling Line Identification Presentation)
- CO Line Access
- CO Line Call Limitation
- Conference
- Confirmation Tone
- Consultation Hold
- COS (Class of Service)
- CPC (Calling Party Control) Signal Detection
- Data Line Security
- Dial Tone
- Dial Tone Transfer
- DID (Direct Inward Dialing)
- DIL (Direct In Line)
- DISA (Direct Inward System Access)
- disa intercept routing—no dial
- disa intercept routing—busy
- disa intercept routing—dnd
- Display Information
- DND (Do Not Disturb)
- Door Open
- Doorphone Call
- features and configurations—e
- EFA (External Feature Access)
- Emergency Call
- Extension Dial Lock
- Extension Feature Clear
- Extension PIN (Personal Identification Number)
- Extension Port Configuration
- External Relay
- External Sensor
- features and configurations—f
- Fixed Buttons
- Flash/Recall/Terminate
- Flexible Buttons
- Flexible Numbering/Fixed Numbering
- Floating Extension
- FWD (Call Forwarding)
- FWD/DND Button, Group FWD Button
- features and configurations—g
- GROUP FEATURES
- paging group
- features and configurations—h
- Hands-free Answerback
- Hands-free Operation
- HOSPITALITY FEATURES
- Hot Line
- features and configurations—i
- ICD GROUP FEATURES
- icd group features—group call distribution
- icd group features—log-in/log-out
- icd group features—outside destinations
- icd group features—overflow
- busy on busy
- icd group features—queuing
- icd group features—supervisory
- icd group features—vip call
- Idle Extension Hunting
- INCOMING CALL FEATURES
- Intercept Routing
- intercept routing—no destination
- Intercom Call
- Internal Call Block
- IP-PT (IP Proprietary Telephone)
- ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
- features and configurations—l
- LED Indication
- line preference—incoming
- line preference—outgoing
- Local Alarm Information
- features and configurations—m
- Manager Features
- MEMORY DIALING FEATURES
- Message Waiting
- Music on Hold
- Mute
- features and configurations—o
- Off-hook Monitor
- OHCA (Off-hook Call Announcement)
- One-touch Dialing
- operator call
- features and configurations—p
- Paging
- Paralleled Telephone
- Password Security
- Pause Insertion
- PC Console/PC Phone
- PC Programming
- PDN (Primary Directory Number)/SDN (Secondary Directory Number Extension
- making calls with an sdn button
- delayed ringing
- Peer-to-Peer Connection
- Power Failure Restart
- Predialing
- Privacy Release
- private network features—centralized voice mail
- multiple vpss
- private network features—network icd group
- private network features—qsig
- private network features—qsig—cf (call forwarding)
- Presentation) and CNIP/CONP (Calling/Connected Name Identification Presentation)
- private network features—qsig—ct (call transfer)
- gateway groups
- automatic rerouting of voip calls to public co lines
- PS Connection
- PS Directory
- PS Feature Buttons
- PT Programming
- features and configurations—q
- Quick Dialing
- features and configurations—r
- Redial, Last Number
- Ring Tone Pattern Selection
- Room Status Control
- features and configurations—s
- Self Labeling (KX-NT366 only)
- SIP (Session Initiation Protocol) Extension
- SMDR (Station Message Detail Recording)
- SNMP (Simple Network Management Protocol) System Monitor
- trap implementation
- Special Carrier Access Code
- Speed Dialing, System
- SVM (Simplified Voice Message)
- direct recording
- Syslog Record Management
- features and configurations—t
- T1 Line Service
- TAFAS (Trunk Answer From Any Station)
- Tenant Service
- tenant-to-tenant call block
- Timed Reminder
- Time Service
- TRS (Toll Restriction)
- denied code tables
- exception code tables
- features and configurations—u
- Upgrading the Software
- features and configurations—v
- Verification Code Entry
- Virtual PS
- Voice Mail (VM) Group
- Voice Mail DPT (Digital) Integration
- live call screening (lcs)
- Voice Mail DTMF Integration
- features and configurations—w
- Walking COS
- Walking Extension
- Walking Extension, Enhanced
- Whisper OHCA
- Wireless XDP Parallel Mode
- Appendix
- Capacity of System Resources
- Tones/Ring Tones
- Supported Management Information Base (MIB) Table
- Revision History
- Index
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
KX-NCP500
Table of contents
- feature manual
- safety notices
- list of abbreviations
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- absent message
- account code entry
- ars (automatic route selection)
- itemized billing code
- automatic callback busy (camp-on)
- automatic extension release
- automatic time adjustment
- bgm (background music)
- ca (communication assistant)
- call distribution port group
- caller id
- call hold
- call log, incoming
- call monitor
- call park
- call pickup
- directed call pickup
- caller information display before call pickup
- call splitting
- call waiting features
- call waiting tone
- cellular phone features
- cli (calling line identification) distribution
- clip (calling line identification presentation)
- co line access
- co line call limitation
- conference group call
- confirmation tone
- consultation hold
- cpc (calling party control) signal detection
- cti (computer telephony integration)
- data line security
- dial tone
- dial tone transfer
- did (direct inward dialing)
- dil (direct in line)
- disa intercept routing—no dial
- disa intercept routing—busy
- disa intercept routing—dnd
- display information
- dnd (do not disturb)
- door open
- doorphone call
- features and configurations—e
- efa (external feature access)
- emergency call
- extension dial lock
- extension feature clear
- extension pin (personal identification number)
- extension port configuration
- external relay
- external sensor
- features and configurations—f
- fixed buttons
- flexible buttons
- flexible numbering/fixed numbering
- fixed numbering
- floating extension
- fwd (call forwarding)
- incoming call distribution group
- fwd/dnd button, group fwd button
- features and configurations—g
- group features
- paging group
- features and configurations—h
- hands-free answerback
- headset operation
- hospitality features
- hot line
- features and configurations—i
- icd group features
- icd group features—group call distribution
- icd group features—log-in/log-out
- icd group features—outside destinations
- icd group features—overflow
- busy on busy
- icd group features—queuing
- manual queue redirection
- icd group features—supervisory
- icd group features—vip call
- idle extension hunting
- incoming call features
- intercept routing
- intercept routing—no destination
- intercom call
- internal call block
- ip-pt (ip proprietary telephone)
- features and configurations—l
- led indication
- line preference—incoming
- line preference—outgoing
- local alarm information
- features and configurations—m
- manager features
- memory dialing features
- message waiting
- music on hold
- features and configurations—o
- off-hook monitor
- ohca (off-hook call announcement)
- operator features
- operator call
- features and configurations—p
- paralleled telephone
- password security
- pause insertion
- pc console/pc phone
- pc programming
- delayed ringing
- peer-to-peer connection
- power failure restart
- power failure transfer
- printing message
- privacy release
- private network features
- private network features—centralized voice mail
- multiple vpss
- private network features—network icd group
- private network features—qsig
- private network features—qsig—cf (call forwarding)
- private network features—qsig—ct (call transfer)
- private network features—qsig—enhanced features
- gateway groups
- ps (portable station)
- ps—co status display (kx-wt125/kx-wt126 only)
- ps—feature buttons
- pt programming
- features and configurations—q
- quick dialing
- features and configurations—r
- redial, last number
- ring tone pattern selection
- room status control
- features and configurations—s
- self labeling (kx-nt366/kx-nt)
- sip (session initiation protocol) extension
- sip refer transfer
- smdr (station message detail recording)
- trap implementation
- special carrier access code
- speed dialing, personal
- speed dialing, system
- svm (simplified voice message)
- message notification
- syslog record management
- features and configurations—t
- t1 line service
- tafas (trunk answer from any station)
- tenant service
- tenant-to-tenant call block
- timed reminder
- time service
- trs (toll restriction)
- denied code tables
- exception code tables
- features and configurations—u
- upgrading the software
- features and configurations—v
- verification code entry
- virtual ps
- voice mail (vm) group
- voice mail dpt (digital) integration
- live call screening (lcs)
- voice mail dtmf integration
- features and configurations—w
- walking cos
- walking extension
- walking extension, enhanced
- whisper ohca
- wireless xdp parallel mode
- capacity of system resources
- tones/ring tones
- revision history
- kx-tde600 pgmpr software file version 3.0xxx
- kx-tde600 pgmpr software file version 4.1xxx
- kx-tde600 pgmpr software file version 5.0xxx
- kx-tde600 pgmpr software file version 6.0xxx
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
KX-NCP500
Table of contents
- operating manual
- feature highlights
- Document Version
- safety notices
- important information
- important safety instructions
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Operation
- before operating the telephones
- your extension number
- when you use a panasonic proprietary telephone
- how to follow the steps
- connection example
- basic operations
- operator call
- answering calls
- absent message
- account code entry
- Alternate Calling—Ring/Voice
- automatic callback busy cancel
- call hold
- call hold retrieve
- call monitor
- call park retrieve
- call pickup
- call pickup deny
- call transfer
- transferring to an outside party using the pbx service
- transferring to an outside party using the sip service
- call waiting features
- answering call waiting in the pbx
- call waiting tone
- character entry
- Conference
- Conference, Unattended
- conference mode
- broadcast mode
- data line security
- DISA (Direct Inward System Access)
- DND (Do Not Disturb)
- dnd override
- door open
- doorphone call
- executive busy override
- executive busy override deny
- extension feature clear
- Extension PIN (Personal Identification Number)
- external relay
- external sensor
- icd group
- headset operation
- to transfer a call
- hospitality features
- ICD GROUP FEATURES
- ICD Group Features—Call Log History for ICD Group
- ICD Group Features—Incoming Call Queue Monitor
- ICD Group Features—Log-in/Log-out
- ICD Group Features—Log-in/Log-out Monitor and Remote Control
- ICD Group Features—Manual Queue Redirection
- initial display
- message waiting
- Mute
- OHCA (Off-hook Call Announcement)
- group paging
- paging deny
- PDN (Primary Directory Number)/SDN (Secondary Directory Number Extension
- printing message
- privacy release
- Private Network Features—CLIR (Calling Line Identification Restriction)
- Private Network Features—COLP (Connected Line Identification Presentation)
- Private Network Features—TIE Line Access
- quick dialing
- check out
- Self Labeling (KX-NT366/KX-NT560)
- Speed Dialing, Personal
- Speed Dialing, System
- recording a greeting message for each time mode
- redirecting your calls to your message box
- listening to voice messages left by callers
- accessing your message box from an outside telephone
- TAFAS (Trunk Answer From Any Station)
- timed reminder
- time service
- verification code entry
- Voice Mail Features—LCS (Live Call Screening)
- Voice Mail Features—Two-way Record
- Voice Mail Features—Voice Mail Integration
- to listen to messages
- Wake-up Call
- dial number
- walking extension
- Walking Extension, Enhanced
- whisper ohca
- wireless xdp parallel mode
- display features
- Call Log, Outgoing
- Directories
- system feature access
- display prompts
- external bgm
- Using a KX-HGT100 SIP Extension
- speed dialing
- Private Network Features—Displaying Your Telephone Number on the Called Party's Telephone
- cellular phone features
- transferring to a private network (tie line access)
- manager operation
- dial tone transfer
- OGM (Outgoing Messages)
- Private Network Features—NDSS (Network Direct Station Selection) Monitor Release
- time service mode control
- Customizing Your Phone & System
- personal programming
- Programming Feature Clear
- customizing the buttons
- manager programming
- system programming
- fixed buttons
- Appendix
- troubleshooting
- feature number table
- Tone
- revision history
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 6.0xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 3.0xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 6.0xxx
- KX-TDE600 PGMPR Software File Version 4.1xxx
- KX-TDE600 PGMPR Software File Version 7.xxxx
- Index
- Table Of Contents
- Table Of Contents
- Table Of Contents
KX-NCP500
Table of contents
- Table Of Contents
- Overview
- Information about IP Telephony Service
- dns (domain name system)
- Important Notice for Subscription and Installation
- bandwidth requirements
- specifications
- Preparations for PC Programming
- system requirements
- installing the maintenance console
- Installing the V-SIPGW16 Card to the PBX
- Programming the V-SIPGW16 Card
- Programming the V-SIPGW16 Card—Port Property
- Main
- Account
- Register
- Option
- Calling Party
- Called Party
- Voice/FAX
- RTP/RTCP
- T.38
- T.38 Option
- Supplementary Service
- Programming the V-SIPGW16 Card—Card Property
- Programming the V-SIPGW16 Card—Shelf Property
- Timer
- Maintenance
- configuration management
- V-SIPGW16 Protocol Trace
- Appendix
- Revision History
- Index
- Table Of Contents
KX-NCP500
Table of contents
- Table Of Contents
- Overview
- Information about IP Telephony Service
- dns (domain name system)
- Important Notice for Subscription and Installation
- Bandwidth Requirements
- Specifications
- Preparations for PC Programming
- Maintenance Console Operating Instructions
- installing the maintenance console
- Installing the V-SIPGW16 Card to the PBX
- Programming the V-SIPGW16 Card
- Programming the V-SIPGW16 Card—Port Property
- Main
- channel attribute
- Account
- Register
- Option
- diversion header (for verizon)
- Calling Party
- Called Party
- Voice/FAX
- inform annex b status (g.729a)
- RTP/RTCP
- T.38
- T.38 Option
- Supplementary Service
- blind transfer (refer)
- Programming the V-SIPGW16 Card—Card Property
- Programming the V-SIPGW16 Card—Shelf Property
- Timer
- Maintenance
- Configuration Management
- V-SIPGW16 Protocol Trace
- Appendix
- Revision History
- KX-TDE100/KX-TDE200 PMMPR Software File Version 3.0xxx
- KX-TDE600 PGMPR Software File Version 3.0xxx
- Table Of Contents
KX-NCP500
Table of contents
- installation manual
- system components
- list of abbreviations
- safety notices
- important information
- important safety instructions
- Table Of Contents
- Table Of Contents
- System Outline
- Basic System Construction
- System Connection Diagram
- Optional Equipment
- Specifications
- Characteristics
- System Capacity
- Activation Key Installation
- Information about the Activation Keys
- Activation Key Code and Key Management System
- Activation Key File
- Installation
- Before Installation
- wiring precautions
- Installation of the PBX
- Names and Locations
- Frame Earth Connection
- Installing/Removing the Optional Service Cards
- Types of Connectors
- Attaching a Ferrite Core
- inch Rack Mounting
- Floor Standing
- Surge Protector Installation
- Information about the Main Processing Card
- DSP4 Card (KX-NCP1104), DSP16 Card (KX-TDE0110), and DSP64 Card KX-TDE0111)
- RMT Card (KX-TDA0196)
- Information about the Virtual Cards
- Information about the Physical Trunk Cards
- T1 Card (KX-NCP1187)
- E1 Card (KX-NCP1188)
- switch settings
- BRI2 Card (KX-NCP1280)
- PRI30 Card (KX-NCP1290CE/KX-NCP1290CJ/KX-NCP1290CN)
- PRI23 Card (KX-NCP1290)
- Information about the Physical Extension Cards
- DLC8 Card (KX-NCP1171)
- DLC16 Card (KX-NCP1172)
- SLC8 Card (KX-NCP1173)
- SLC16 Card (KX-NCP1174)
- Information about the Other Physical Cards
- DPH4 Card (KX-TDA0161)
- DPH2 Card (KX-TDA0162)
- EIO4 Card (KX-TDA0164)
- external sensor
- ECHO16 Card (KX-TDA0166)
- MSG4 Card (KX-TDA0191)
- ESVM2 Card (KX-TDA0192) and ESVM4 Card (KX-TDA0194)
- Connection of Extensions
- Parallel Connection of the Extensions
- Digital EXtra Device Port (Digital XDP) Connection
- First Party Call Control CTI Connection
- Connection of Doorphones, Door Openers, External Sensors, and External Relays
- Connection of Peripherals
- LAN Connection
- Power Failure Connections
- Starting the PBX
- Guide for the Maintenance Console
- Overview
- PC Connection
- Installation of the Maintenance Console
- Troubleshooting
- Connection
- Operation
- Using the Reset Button
- Troubleshooting by Error Log
- Appendix
- Revision History
- PBMPR Software File Version 4.1xxx
- PBMPR Software File Version 5.0xxx
- Index
KX-NCP500
Table of contents
- safety notices
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Introduction
- Entering Characters
- PC Programming
- pbx web manager
- Password Security
- Introduction of Maintenance Console
- Access Levels
- Software Interface
- Card Status
- Display Options
- Program launcher
- Program launcher—Connect—USB
- Program launcher—Connect—Modem
- Program launcher—Connect—Profile Setup
- File
- Disconnect
- Tool
- Tool—Call Pickup for My Group
- Tool—Import
- Tool—Export
- Utility
- Utility—File Transfer PC to PBX (SD Card)
- Utility—File Transfer PBX (SD Card) to PC
- Utility—SD Card File View and Load
- Utility—SD Card File Delete
- Utility—Message File Transfer PBX to PC
- Utility—T1 Signaling Bit Monitor
- Utility—T1 Line Trace
- Utility—V-IPGW16 Protocol Trace
- Utility—IP Extension Statistical Information
- Utility—PS Information
- Utility—CS Status Monitor
- Utility—Ping
- Utility—File Transfer FTP to IP Equipment—NT3xx
- Utility—System Reset—Reset by the Command
- Utility—Flash ROM ID Information
- Help
- Configuration
- Slot
- Slot—Summary
- Slot—Activation Key
- Slot—Card Property - IPCMPR
- Slot—OPB3 Card Property
- Slot—OPB3 Card Property—Card Command
- Slot—Port Property - Virtual IP Gateway Port
- call distribution port group
- Slot—Port Property - Virtual IP Gateway Port—Connection Command
- Slot—Shelf Property - Virtual IP Gateway
- incoming call
- Slot—Shelf Property - Virtual IP Gateway—GK Settings
- Slot—Shelf Property - Virtual IP Gateway—GW Settings
- Slot—Shelf Property - Virtual IP Gateway—DN2IP
- Slot—Shelf Property - Virtual IP Gateway—Hunt Pattern
- Slot—Card Property - Virtual IP Extension
- Slot—Port Property - Virtual IP Extension
- Slot—Port Property - Virtual IP Extension—Connection Command
- Slot—Card Property - Virtual SIP Extension
- Slot—Port Property - Virtual SIP Extension Port
- Slot—Port Property - Virtual SIP Extension Port—Connection Command
- Slot—Card Property - Virtual IPCS
- Slot—Port Property - Virtual IPCS
- Slot—Port Property - Virtual IPCS—Connection Command
- Slot—Card Property - Extension Type
- Slot—Port Property - Extension Port
- xdp mode
- parallel telephone ringing
- Slot—Port Property - Extension Port—Connection Command
- Slot—Port Property - Extension Port—Port Type View
- Slot—Card Property - LCO type
- Slot—Port Property - LCO Port
- Slot—Port Property - LCO Port—Connection Command
- Slot—Card Property - PRI type
- Slot—Port Property - PRI Port
- network configuration
- Slot—Port Property - PRI Port—Connection Command
- Slot—Card Property - T1 type
- Slot—Port Property - T1 Port
- Slot—Port Property - T1 Port—Connection Command
- Slot—OPB3 Option Card Setup
- Portable Station
- Option
- Document Version 2009-12 PC Programming Manual
- Clock Priority
- System
- Date & Time—Date & Time Settings
- Date & Time—SNTP / Daylight Saving
- Date & Time—SNTP / Daylight Saving—Daylight Saving
- Operator & BGM
- Timers & Counters
- Week Table
- Week Table—Time Setting
- Holiday Table
- Numbering Plan—Main
- trunk group access
- single co line access
- directed call pickup
- group paging answer
- account code entry
- manual call waiting for extension call
- automatic call waiting
- incoming call queue monitor
- simplified voice message access
- Numbering Plan—Quick Dial
- Numbering Plan—B/NA DND Call Feature
- Class of Service—COS Settings
- trs level for system speed dialing
- transfer to co
- account code mode
- dnd override
- executive busy override deny
- programming mode level
- door unlock
- Class of Service—External Call Block
- Class of Service—Internal Call Block
- Ring Tone Patterns—Call from CO
- Ring Tone Patterns—Call from Doorphone
- Ring Tone Patterns—Call from Others
- System Options
- Extension CID Settings
- caller id signal type
- Audio Gain—Paging/MOH
- Audio Gain—Card
- Group
- Trunk Group—TRG Settings
- line hunting order
- host pbx access code
- Trunk Group—Local Access Priority
- Caller ID Modification
- Dialing Plan
- Dialing Plan—Auto Assign
- Extension Group
- Call Pickup Group
- Call Pickup Group—All Setting
- Paging Group
- Paging Group—All Setting
- Paging Group—External Pager
- external pager
- Incoming Call Distribution Group—Group Settings
- overflow queuing busy
- overflow no answer
- queuing time table
- extension no answer redirection time
- Incoming Call Distribution Group—Group Settings—Member List
- delayed ring
- Incoming Call Distribution Group—Queuing Time Table
- Incoming Call Distribution Group—Miscellaneous
- Extension Hunting Group
- Extension Hunting Group—Member List
- VM(DPT) Group—System Settings
- VM(DPT) Group—Unit Settings
- VM(DPT) Group—Unit Settings—Member List
- VM(DTMF) Group—System Settings
- VM(DTMF) Group—Group Settings
- VM(DTMF) Group—Group Settings—Member List
- PS Ring Group
- PS Ring Group—Member List
- Air Synchronization Group
- Extension
- Wired Extension—Extension Settings
- paging deny
- Wired Extension—Extension Settings—CLIP Generate
- Wired Extension—FWD/DND
- Wired Extension—Speed Dial
- Wired Extension—Flexible Button
- Wired Extension—Flexible Button—Flexible button data copy
- Wired Extension—PF Button
- Wired Extension—NDSS Link Data - Send
- Wired Extension—Simplified Voice Message
- Portable Station—Extension Settings
- svm lock
- Portable Station—Extension Settings—CLIP Generate
- Portable Station—FWD/DND
- Portable Station—Flexible Button
- Portable Station—Flexible Button—Flexible button data copy
- Portable Station—NDSS Link Data - Send
- Portable Station—Simplified Voice Message
- DSS Console
- DSS Console—DSS key data copy
- Optional Device
- Doorphone
- External Pager
- Voice Message—DISA System
- Voice Message—DISA Message
- Voice Message—SVM
- remote access
- External Relay
- External Sensor
- Feature
- System Speed Dial
- Hotel
- Verification Code
- Second Dial Tone
- Absent Message
- Tenant
- ars mode
- Denied Code
- Exception Code
- Special Carrier
- Emergency Dial
- Miscellaneous
- System Setting
- Leading Number
- Routing Plan Time
- Routing Plan Time—Time Setting
- Routing Plan Priority
- Carrier
- Leading Number Exception
- Authorization Code for TRG
- TIE Table
- trunk group
- Network Data Transmission
- Network Operator (VoIP)
- NDSS Key Table
- CO & Incoming Call
- CO Line Settings
- trunk group number
- DIL Table & Port Settings
- DID Table
- DID Table—Automatic Registration
- DID Table—Name Generate
- Maintenance
- Main
- PT Programming Access
- Power Failure Transfer
- SNMP—System Setting
- SNMP—Manager
- Air Synchronization
- Appendix
- Revision History
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 2.02xx
- Feature Programming References
- Document Version
- call hold
- call park
- call waiting features
- co line access
- co line call limitation
- confirmation tone
- data line security
- display information
- emergency call
- extension dial lock
- extension port configuration
- flexible buttons
- group features
- hot line
- idle extension hunting
- intercom call
- led indication
- manager features
- operator features
- pause insertion
- privacy release
- quick dialing
- special carrier access code
- t1 line service
- timed reminder
- upgrading the software
- voice mail dtmf integration
- whisper ohca
KX-NCP500
Table of contents
- safety notices
- list of abbreviations
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Call Handling Features
- Incoming Call Features
- Direct In Line (DIL)
- Direct Inward Dialling (DID)/Direct Dialling In (DDI)
- Multiple Subscriber Number (MSN) Ringing Service
- Calling Line Identification (CLI) Distribution
- Intercept Routing
- Intercept Routing—No Destination
- Internal Call Features
- Internal Call Block
- Incoming Call Indication Features
- Ring Tone Pattern Selection
- Call Waiting
- Receiving Group Features
- Incoming Call Distribution Group Features
- Group Call Distribution
- Outside Destinations in Incoming Call Distribution Group
- Queuing Feature
- VIP Call
- Overflow Feature
- Log-in/Log-out
- Supervisory Feature
- Call Forwarding (FWD)/Do Not Disturb (DND) Features
- Call Forwarding (FWD)
- Do Not Disturb (DND)
- FWD/DND Button, Group FWD Button
- Answering Features
- Line Preference—Incoming
- Call Pickup
- Hands-free Answerback
- Making Call Features
- Automatic Extension Release
- Intercom Call
- Trunk Call Features
- Emergency Call
- Account Code Entry
- Dial Type Selection
- Reverse Circuit
- Trunk Busy Out
- Pause Insertion
- Special Carrier Access Code
- Seizing a Line Features
- Line Preference—Outgoing
- Trunk Access
- Memory Dialling Features
- One-touch Dialling
- KX-T7710 One-touch Dialling
- Last Number Redial
- Speed Dialling—Personal/System
- Quick Dialling
- Hot Line
- Primary Directory Number (PDN)/Secondary Directory Number (SDN Features
- Busy Line/Busy Party Features
- Executive Busy Override
- Call Monitor
- Caller Information before Executive Busy Override or Call Monitor
- Second Call Notification to Busy Extension
- Call Waiting Tone
- Off-hook Call Announcement (OHCA)
- Whisper OHCA
- Toll Restriction (TRS)/Call Barring (Barring) Features
- Budget Management
- Extension Dial Lock
- Dial Tone Transfer
- Walking COS
- Verification Code Entry
- Automatic Route Selection (ARS) Features
- Conversation Features
- Off-hook Monitor
- Mute
- Headset Operation
- Data Line Security
- Flash/Recall/Terminate
- External Feature Access (EFA)
- Trunk Call Limitation
- Parallelled Telephone
- Calling Party Control (CPC) Signal Detection
- Transferring Features
- SIP Refer Transfer
- Holding Features
- Call Park
- Call Splitting
- Music on Hold
- Conference Features
- Conference
- Privacy Release
- Conference Group Call Features
- Paging Features
- Optional Device Features
- Door Open
- Trunk Answer From Any Station (TAFAS)
- Background Music (BGM)
- Outgoing Message (OGM)
- Direct Inward System Access (DISA)
- Built-in Simplified Voice Message (SVM)
- message notification
- Automatic Fax Transfer
- External Sensor
- External Relay Control
- Caller ID Features
- Incoming Call Log
- Message Features
- Absent Message
- Proprietary Telephone (PT) Features
- dss console
- Flexible Buttons
- LED Indication
- Display Information
- Integrated Services Digital Network (ISDN) Service Features
- Calling/Connected Line Identification Presentation (CLIP/COLP)
- Advice of Charge (AOC)
- Call Forwarding (CF)—by ISDN (P-MP)
- Call Forwarding (CF)—by ISDN (P-P)
- Call Hold (HOLD)—by ISDN
- Call Transfer (CT)—by ISDN
- Three-party Conference (3PTY)—by ISDN
- Malicious Call Identification (MCID)
- Completion of Calls to Busy Subscriber (CCBS)
- ISDN Extension
- ISDN Service Access by Keypad Protocol
- E1 Line Service Features
- T1 Line Service Features
- Voice Mail Features
- Voice Mail DTMF Integration
- Voice Mail DPT (Digital) Integration
- Portable Station (PS) Features
- PS Ring Group
- PS Directory
- PS Feature Buttons
- Wireless XDP Parallel Mode
- Virtual PS
- Administrative Information Features
- Syslog Record Management
- Printing Message
- Call Charge Services
- Hospitality Features
- Room Status Control
- Call Billing for Guest Room
- Extension Controlling Features
- Extension Feature Clear
- Walking Extension Features
- Enhanced Walking Extension
- Timed Reminder
- Audible Tone Features
- Confirmation Tone
- Networking Features
- Making a TIE Line Call
- TIE Line and Trunk Connection
- TIE Line Programming
- Common Extension Numbering for 2 PBXs
- Voice over Internet Protocol (VoIP) Network
- Gateway Groups
- Common Extension Numbering for Multiple PBXs
- Call Distribution Port Group
- ISDN Virtual Private Network (ISDN-VPN)
- QSIG Standard Features
- Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG
- Call Forwarding (CF)—by QSIG
- Call Transfer (CT)—by QSIG
- Completion of Calls to Busy Subscriber (CCBS)—by QSIG
- QSIG Enhanced Features
- Network Direct Station Selection (NDSS)
- Centralised Voice Mail
- Network ICD Group
- PS Roaming by Network ICD Group
- IP Telephone Features
- SIP (Session Initiation Protocol) Extension
- Peer-to-Peer Connection
- Self Labelling (KX-NT366/KX-NT560)
- Computer Telephony Integration (CTI) Features
- PC Phone/PC Console
- CA (Communication Assistant)
- Cellular Phone Features
- System Configuration and Administration Features
- System Configuration—Hardware
- System Configuration—Software
- Group
- Tenant Service
- Time Service
- Operator Features
- Manager Features
- System Data Control
- PT Programming
- Password Security
- Quick Setup
- Automatic Setup
- Flexible Numbering/Fixed Numbering
- Floating Extension
- Software Upgrading
- Fault Recovery/Diagnostics
- Power Failure Restart
- Local Alarm Information
- Simple Network Management Protocol (SNMP) System Monitor
- Dynamic Host Configuration Protocol (DHCP) Assignment
- Packet Internet Groper (PING) Confirmation
- Appendix
- Capacity of System Resources
- Tones/Ring Tones
- Supported Management Information Base (MIB) Table
- Revision History
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 4.1xxx
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 5.0xxx
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 6.0xxx
- KX-NCP500/KX-NCP1000 PBMPR Software File Version 7.xxxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 2.0xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 2.01xx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 3.0xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 4.1xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 5.0xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 6.0xxx
- KX-TDE100/KX-TDE200 PMMPR Software File Version 7.xxxx
- KX-TDE600 PGMPR Software File Version 3.0xxx
- KX-TDE600 PGMPR Software File Version 4.1xxx
- KX-TDE600 PGMPR Software File Version 5.0xxx
- KX-TDE600 PGMPR Software File Version 6.0xxx
- KX-TDE600 PGMPR Software File Version 7.xxxx
- Index
KX-NCP500
Brand: Panasonic | Category: Telephone System