Panasonic KX-NCP500 Manual

Also see for KX-NCP1000: Brochure & specs Specifications Installation manual Networking guide User manual

Contents

Panasonic KX-NCP500 Manual Manual pdf 84 page image

Parameter DescriptionsUnit StatusParameter DescriptionPhone Number Specifies the extension number of the KX-HGT100.Unit Information Specifies the status of the KX-HGT100 as follows:• Update Profile: Basic Setting is not programmed (e.g., factorydefault).• Registering: Registering the KX-HGT100 to the PBX.• Normal: The KX-HGT100 is registered.• Malfunctioning: The KX-HGT100 is in an error state.• LAN cable unplugged: The LAN port of the KX-HGT100 is notreceiving any network signal.• IP Address expired: IP address lease time from the DHCPserver has expired.• IP Address conflict: The IP address of the KX-HGT100 conflictswith other network devices.Model Specifies the model number of the KX-HGT100.Operating Bank Specifies the number of the memory bank for the currentfirmware.*1IPL Version Specifies the IPL (Initial Program Loader) version.Firmware Version Specifies the current firmware version of the KX-HGT100.*1 There are two memory banks. The Operating Bank number will cycle between these two memory banks, changing each time thefirmware is upgraded.84 IP Networking Guide Document Version 2009-124.5.1 Registering IP Telephones