3.3 System Programming3.3.1 Programming InformationYou can customize your system according to your requirements.[Your system already has default settings (factory installed).]The programming is shown below. (Program number)• The date and time [000]• System speed dialing numbers and names [001]/[002]• Extension number and name [003]/[004]Available ExtensionThe extension allowed through COS programmingRequired TelephoneA Panasonic Proprietary Telephone with display (over 2 lines)(e.g., KX-NT343, KX-DT346, KX-T7636)System PasswordTo enter programming mode, the system password (max. 10 digits) is required. (Default: 1234)CAUTION• The PBX has a default password preset. For security, change the password the first time that youprogram the PBX.• It is strongly recommended that a password of 10 numbers or characters be used for maximumprotection against unauthorized access. For a list of numbers and characters that can be used in thepassword, refer to "1.3.14 Character Entry".• To avoid unauthorized access to the PBX, keep the password secret. If it becomes known to others,the PBX may be misused.• Change the password periodically.ConditionsThe programming extension must be idle, on-hook and holding no calls.ListBefore programming, decide the settings and write them down. Your notes will provide a useful record of theprogramming for future reference. Your dealer also has programming records which contain all of the systemprogramming. You may ask for photocopies of these tables to be aware of the facilities and features available.Icon DescriptionsFixed ButtonsFunctionKX-NT300/KX-DT300KX-NT136/KX-T7600 KX-T7200/KX-T7400*1REDIALPREVIOUS (PREV)SP-PHONENEXT198 Operating Manual Document Version 2010-083.3.1 Programming Information
