PC Programming Manual References4.5 [2-3] Timers & Counters—Miscellaneous→ Caller ID—Waiting to receive→ Caller ID—Visual Caller ID Display4.18 [2-9] System Options—Option 4— Private Network—Public Call through Private Network—MinimumPublic Caller ID Digits4.19 [2-10] Extension CID Settings5.1 [3-1-1] Trunk Group—TRG Settings—Main— Caller ID Modification Table5.3 [3-1-3] Caller ID Modification6.1 [4-1-1] Wired Extension—Extension Settings—Option 8→ Extension Caller ID→ Incoming Call Wait Timer for Extension Caller ID8.1 [6-1] System Speed DialPT Programming Manual References[001] System Speed Dialing Number[002] System Speed Dialing Name[490] Caller ID Signal TypeFeature Manual References16.1.3 SMDR (Station Message Detail Recording)16.1.6 Speed Dialing, Personal16.1.7 Speed Dialing, System3.1.4 Call HoldDescriptionAn extension user can put a call on hold. The following Hold features are available:Feature DescriptionRegular Hold Any extension can retrieve a held call.Exclusive Call Hold Only the extension user who held the call can retrieve it.The result of the holding operation can be determined through system programming. Pressing the HOLD buttonagain just after the first time alternates the mode between Regular and Exclusive Call Hold.Conditions• Call Hold LimitationA proprietary telephone (PT) user can hold one intercom call and/or multiple CO line calls at a time. Asingle line telephone (SLT) user can hold either one intercom call or one CO line call at a time. By usingthe Call Park feature, PT and SLT users can hold multiple CO line calls and intercom calls simultaneously.(® 3.1.7 Call Park)• Music on HoldMusic, if available, is sent to the held party. (® 11.1.4 Music on Hold)• Hold Recall36 Feature Manual Document Version 2009-123.1.4 Call Hold
