2.5.6 Tool—Call Pickup for My GroupAllows you to automatically configure settings in 4.10 [2-6-2] Numbering Plan—Quick Dial and 6.4 [4-1-3]Wired Extension—Speed Dial so that users can answer calls to their Call Pickup Group by pressing " 0".To activate this tool• From the Tool menu, select Call Pickup for My Group.The Group Call Pickup feature number (default: 40) + the extension user group number of the extensionis assigned to first personal speed dial.NoteThis tool can only be activated if all of the following conditions are met:– The first Quick Dial setting is empty or is already set to " 0".– " 0" is not used for another feature number.– The Group Call Pickup feature number has been assigned.– The Personal Speed Dialing feature number has been assigned.2.5.7 Tool—Extension List ViewDisplays a list of all programmed extension numbers and types. It is possible to sort the information accordingto Extension Number, Type, Extension Name, Shelf, Slot, or Port. There is also a key-word searching feature.The types that can be displayed are as follows:Type DetailIntercom Wired ExtensionVM Voice MailPortable Station Wireless Extension (Portable Station)ICDG Incoming Call Distribution GroupWG PS Ring GroupVM (DPT) VM (DPT) GroupVM (DTMF) VM (DTMF) GroupPager External PagerMODEM Analog ModemOGM (DISA) DISADSS DSS ConsoleDPT-I/F CS PT-interface CSSVM SVM FeatureSIP/IP-PT IP TelephoneTo view extension information• From the Tool menu, select Extension List View.38 PC Programming Manual Document Version 2009-122.5.7 Tool—Extension List View
