Feature Manual References13.1.26 PS Connection19.1.3 Voice Mail (VM) Group21.1 Capacity of System ResourcesOperating Manual References4.2.1 Feature Number Table6.1.5 Floating ExtensionDescriptionVirtual extension numbers can be assigned to resources to make them as easily accessible as extensions.These numbers are referred to as "floating extension numbers" and can be assigned as a destination ofincoming calls, intercepted calls, etc.This feature is also known as Floating Station.Resource Description DefaultDevice External Pager Used as the destination for the Trunk AnswerFrom Any Station (TAFAS) feature. (®17.1.2 TAFAS (Trunk Answer From AnyStation))600Outgoing Message(OGM)Used to play messages for callers via theDirect Inward System Access (DISA) feature.(® 4.1.8 DISA (Direct Inward SystemAccess))5 + two-digitOGM numberSimplified VoiceMessage (SVM)Used to access message boxes associatedwith extensions. (® 16.1.8 SVM (SimplifiedVoice Message))SVM card 1: 591SVM card 2: 592Analog RemoteMaintenanceUsed to access PC programming modethrough a modem on a PC. 599Group Incoming CallDistribution (ICD)GroupUsed to call an ICD group. (® 9.1.1 ICDGROUP FEATURES) 6 + two-digitgroup numberPS Ring Group Used to call a PS ring group. (® 13.1.29 PSRing Group) —VM (DPT) Group Used to call a VM (DPT) group. 500 (VM [DPT]Group 1)VM (DTMF) Group Used to call a VM (DTMF) group. —Conditions• Certain resources which are assigned a floating extension number can also be assigned a name.Document Version 2009-12 Feature Manual 1136.1.5 Floating Extension
