15.1 R15.1.1 Redial, Last NumberDescriptionEvery extension automatically saves the last external telephone number dialed, allowing the same number tobe dialed again.Outgoing Call LogInformation on outgoing CO line calls is automatically logged at each extension. Users of display PTs can viewdetails of a preset number of recently dialed telephone numbers, and easily call the same outside party again.Automatic RedialIf Last Number Redial is performed in hands-free mode and the called party is busy, the number will beautomatically redialed a preprogrammed number of times.This feature is available only on certain proprietary telephone (PT) models which have the SP-PHONE button.Conditions• Memorized telephone numbers are replaced by new ones.• Interrupt RedialWhen an outside party or seized CO line is busy, a user can attempt to redial the number by pressing theREDIAL button without going on-hook. This can be performed several times without having to go on-hook.• Outgoing Call Log Display by REDIAL ButtonThe REDIAL button can be programmed through system programming to display the Outgoing Call Log.This feature is available for display PT users while on-hook.• If the Outgoing Call Log is used to redial an outside party, or a number already stored in the Outgoing CallLog is manually redialed again, the number will be stored in the call log multiple times. However, calls madeusing the REDIAL button are not stored in the Outgoing Call Log again.• It is possible to change the number of records that can be stored at each extension through systemprogramming.• Automatic Redial is canceled if any dialing operations are performed, an incoming call is answered duringAutomatic Redial, or the Redial Call No Answer Ring Time is expires.The Redial Call No Answer Ring time is programmable.• Automatic Redial is only available for calls that are dialed using a PRI line.PC Programming Manual References4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone→ Automatic Redial—Repeat Counter→ Automatic Redial—Redial Call Ring Duration→ Automatic Redial—Analog CO Mute / Busy Detection Timer4.9 [2-6-1] Numbering Plan—Main—Features— Redial4.18 [2-9] System Options—Option 2→ Redial—Automatic Redial when No Answer (ISDN)→ Redial—Save Dial After Connection to Redial Memory→ Redial—Call Log by Redial key6.1 [4-1-1] Wired Extension—Extension Settings—Option 7— Outgoing Call Log Memory6.10 [4-2-1] Portable Station—Extension Settings—Option 7— Outgoing Call Log Memory274 Feature Manual Document Version 2009-1215.1.1 Redial, Last Number
