Conditions• To use this feature, call forwarding to CO lines must be enabled through COS programming.PC Programming Manual References3.39 [1-2] Portable Station—PS Registration and De-registrationPT Programming Manual References[690] PS RegistrationFeature Manual References6.1.6 FWD (Call Forwarding)19.1.3 Voice Mail (VM) GroupDescriptionA VPS can be connected to extension ports of the PBX. The extension ports make a group, called a VM group.This group has a floating extension number. The VM group can be the destination for redirected calls andincoming calls. When receiving a call, the VPS can greet the caller offering them the option to leave a messageor dial a number to reach the desired party. The VPS can record the message for each extension and leavenotification on the corresponding extension, if the called extension is not able to answer calls.1. VM Group TypeType DescriptionVM (DTMF) GroupA group of SLT ports which use the Voice Mail DTMFIntegration features.A maximum of 2 groups can be assigned.VM (DPT) GroupA group of DPT ports which use the Voice Mail DPT (Digital)Integration features.• A maximum of 2 KX-TVS/KX-TVP systems can beconnected to the PBX.• A maximum of one VM (DPT) group per KX-TVS/KX-TVP can be assigned.• A maximum of 12 ports (24 channels) of the VPS canform each group.Document Version 2009-12 Feature Manual 32719.1.3 Voice Mail (VM) Group
